Luane’s winter World in Second Life

Luane’s World, December 2021 – click any image for full size

Luane’s World is a region I’ve oft visited over the years, it being a popular destination that is always rich in detail and visually impressive through every iteration, thanks to the care region holder LuaneMeo pours into it. However, I have to admit it has been a few years since I last visited when it has been dressed for winter. Hopefully, this post helps rectify that fact.

For 2021, Luane presents a rural setting centred on a frozen body of water bordered by lowlands to the south, west and north and highland to the east, the latter also forming the region’s landing point, safely fenced off from the cliff edges and risk of falling to the lake below, while two routes of exploration extend away from it.

Luane’s World, December 2021

The first is via a high bridge spanning one of the three channels into the lake; the second takes a set of steps down the eastern slope to where the path splits north and south. The northern arm of the path points the way out for the region and into the adjoining residential regions Luane also operates, and which sit outside of this article. The southern arm of the path offers a route around the lands surrounding the lake, eventually meeting the path away from the landing point and the high bridge by the landing point.

The highlands across the bridge are home to an open air café presided over by bulldog riding mini Santas while their “little” helpers (who are a good deal taller than the Santas, if shorter than us!) take care of stuffing sacks with goodies. Alongside of them a long, snowy slope runs westwards to join the path circling the lake.

Luane’s World – December 2021

A relatively gentle incline, the slope can be walked down (or up), but for those making the descent, a sign board at the lip of the slope offers the chance to take a sled down the hill – just watch out for the gentle curve in the slope   and the slight risk of hitting some low stone marking the far side of the snowy trail!

Being frozen, the lake is ideal for skating, as proven by the penguins zipping and dancing across it (plus one Emperor Penguin who appears to have decided skis are a much better option!). Those who wish to join them ca find skates available at the little pier on the western shore, close to the box bridge crossing another of the channel leading into / out of the lake.

Luane’s World, December 2021

This pier is also home to a  – wait for it – bumper car rezzer. While this may at first sound odd, allowing for some unevenness in some the ice elements on the lake, the cars can be a lot of fun for scooting around the lake and offer three different modes of driving, depending on whether you want a quiet pootle or engage in a little friendly competition with friends – just do be aware of any skaters (including the penguins!) also on the ice.

For those seek a little respite from the cold, the lowland offer a number of places visitors can retreat into; a total of five cabins and cottages are available, all furnished and ready to offer a touch of warmth to counter the snow – although one might take a little bit of locating 🙂 . Also awaiting discovery is a cave with a touch of Christmas spirit hidden within it.

Luane’s World – December 2021
Luane’s World – December 2021

Beautifully laid out, easy to explore, rich in opportunities for photos, Luane’s World remains a delightful place to visit.

SLurl Details

2021 viewer release summaries week #48

Logos representative only and should not be seen as an endorsement / preference / recommendation

Updates from the week ending Sunday, December 5th

This summary is generally published every Monday, and is a list of SL viewer / client releases (official and TPV) made during the previous week. When reading it, please note:

  • It is based on my Current Viewer Releases Page, a list of all Second Life viewers and clients that are in popular use (and of which I am aware), and which are recognised as adhering to the TPV Policy. This page includes comprehensive links to download pages, blog notes, release notes, etc., as well as links to any / all reviews of specific viewers / clients made within this blog.
  • By its nature, this summary presented here will always be in arrears, please refer to the Current Viewer Release Page for more up-to-date information.
  • Note that for purposes of length, TPV test viewers, preview / beta viewers / nightly builds are generally not recorded in these summaries.

Official LL Viewers

  • Release viewer: version version 6.5.0.565607, formerly the Maintenance RC and dated November 10, promoted November 15 – this viewer now contains a fix for the media issues caused by the Apple Notarisation viewer.
  • Release channel cohorts:
    •  No updates.
  • Project viewers:
    • Performance Improvements project viewer updated to version 6.4.24.565672 (dated November 17) November 22.

LL Viewer Resources

Third-party Viewers

V6-style

  • Kokua: 6.5.0.48132 (no RLV) 6.5.0.51382 (RLV variants) August 14 – release notes.

V1-style

Mobile / Other Clients

  • No updates.

Additional TPV Resources

Related Links

Space Sunday: the ISS, and commercial launch systems

The International Space Station, November 8th, 2021. Credit. T. Pesquet / ESA / NASA

The International Space Station (ISS) faced further threats from space debris this past week. One December 1st., a planned EVA spacewalk by NASA astronauts Thomas Marshburn and Kayla Barron was pushed back 24 hours over concerns about an unspecified debris threat that might be related to continuing concerns over the recent Russian ASAT missile test that left a cloud of debris orbiting Earth in an orbit that can pass relatively close to the space station.

Then on December 3rd, the ISS had to take more direct action to avoid any risk of collision with a piece of debris designated 39915, a major part of the upper stage of a Pegasus air-launched rocket that flew in 1994, and broke apart two years later.

Tracking the debris showed it would come within 5.5 km of the station, so the decision was taken to use the motors of a Progress re-supply vehicle to lower the station’s orbit to increase the clearance between it and the debris.

The ISS seen from “above” showing the main truss with 8 of the 12 gold solar arrays, the grey thermal radiators, the “international” modules towards the bottom of the picture and the Russian modules extending back between the thermal radiators. Credit; T. Pesquet / ESA / NASA

The motor firing took place at 08:00 UTC on December 3rd, with the thrusters on the Progress vehicle firing for three minutes. The manoeuvre is not expected to impact the December 8th launch of Soyuz MS-20 on Wednesday, December 8th, classified a “space tourism” flight featuring Japanese billionaire Yusaku Maezawa and his assistant, Yozo Hirano on an 18-day trip to the ISS. This will mark the first tourist flight to the space station since 2009. Maezawa is also the name (and money) behind the proposed Dear Moon cislunar mission using a SpaceX Starship vehicle.

All of this excitement blotted the news that NASA’s Office of Inspector General (OIG) has warned that NASA and its partners will potentially be without any Earth orbiting space station for a number of years if the ISS is to be “retired” as may currently be the case.

While NASA awarded US $415.6 million to three U.S. groups to develop designs for new orbit “destinations” – commercially-run space stations that can take over from the ISS from 2030 onwards – OIG has stated concerns any of these plans can be realised by that year – seen as the year in which ISS operations are expected to draw to a close.

One of the groups awarded a NASA contract is lead by Blue Origin and Sierra Space, who are promoting their Orbital Reef space station. Credit: Blue Origin / Sierra Space

In particular, the OIG report questions the ability for any commercial space station to be ready by the end of the decade, given the commercial market for on-orbit activities sans government financial support has yet to be assessed, as have the overall costs of developing space station facilities – or even the amount of funding NASA can provide to help ease development along.

In our judgment, even if early design maturation is achieved in 2025 — a challenging prospect in itself — a commercial platform is not likely to be ready until well after 2030. We found that commercial partners agree that NASA’s current timeframe to design and build a human-rated destination platform is unrealistic.

– NASA OIG report on commercial space stations

The report suggests that a further extension to ISS operations to eliminate any gap. However, doing so requires clearing some significant hurdles. The first is that of finance. The Untied States covers more than 50% of the ISS operational budget, and feelings about continuing to support the project beyond 2030 within Congress are very mixed.

There is also the fact that several of the older modules – notably the Russian Zvezda service module – are approaching the end of their operational life. Zvezda in particular has been suffering numerous leaks that have affected overall atmospheric pressure within the station, and numerous fatigue cracks have been located within the module’s structure, not all of which can be fully repaired.

Finally, Russia has indicated it is unwilling to support ISS operations beyond 2030, and is considering using the recently-delivered Prichal module on the ISS as an initial element of that station – although the loss of the module would not necessarily impede ISS operations if no agreement on extending operations beyond 2030 were to be reached.

ISS from “beneath”, with the damaged thermal radiator clearly visible. The “international” modules are up and to the right, the Russian modules to the lower left. Also visible is the Cygnus automated re-supply vehicle (with the circular blue/gold solar arrays, a Soyuz vehicle just to the left and below it, and a Progress re-supply vehicle beneath the lower left end of the station. Credit: T. Pesquet / ESA / NASA

As it is, the ISS has, since 2000, been visited by 403 individual crewed flights that have delivered 250 people to the station, and it remains a remarkable piece of space engineering and construction.

Just how remarkable was again shown in November 2021, when the Crew 2 mission departed the ISS aboard SpaceX Crew Dragon Endeavour; because as they did so, they took a ride around the ISS taking photos that were released this week.

Captured by ESA astronaut Thomas Pesquet, these images reveal the station in great detail – including what appears to be damage caused by what may have been a debris strike on one of the radiator panels.

They also reveal the stunning complexity of the station’s design from the long truss “keel” that is home to the station’s thermal radiator, vital for carrying away heat, and massive primary solar arrays, vital for providing power, to the “international” modules slung “under” it and focused around the US Harmony module, and the “tail” of the Russian built modules with their own solar arrays. In addition the Soyuz, Progress and Cygnus vehicles docked with the station can also be seen in some of the images.

SpaceX and Rocket Lab Updates

SpaceX Gear-Up and Problems

SpaceX is gearing-up for Starship  / Super Heavy operations, and also to support further crew flights to / from the ISS.

On Friday, December 3rd, the company indicated it is to resume / start work in earnest on new Starship / Super Heavy launch facilities at Kennedy Space Centre. The new facilities will be at Pad 39A, which SpaceX leased from NASA in 2014 in a 20-year agreement, and which has been the home of Falcon 9 and Falcon Heavy vehicles – and will remain so, despite the construction work.

Work on Starship / Super Heavy launch facilities within the Pad 39A launch pad area  – home of all but two of the Apollo lunar missions – in 2019, but the work was quickly halted in favour of the work being carried out at the company’s Boca Chica facilities. The plan is to build facilities of a similar nature to those at Boca Chica, but with improvements learned as a result of that work.

Kennedy Space Centre Pad 39A showing the SpaceX Falcon / Falcon Heavy launch facilities and the location of the Starship / Super Heavy launch facilities, where construction work has now resumed. Credit: Spacenews.com

The same day as SpaceX confirmed work on the Kennedy Space Centre launch facilities for Starship was resuming, NASA announced it was awarding a further three contracts to SpaceX for crew missions to / from the International Space Station (ISS) in addition to those already assigned to both SpaceX and Boeing, in part as a hedge against Boeing continuing to having issues with their CST-100 Starliner crew vehicle, which has yet to complete its demonstration crewed flight test, now due for some time in 2022.

Neither NASA nor Boeing have issued any update on the status of Starliner since October after valve corrosion problems caused the planned crew flight test to be  scrubbed and the vehicle returned to Boeing’s facilities. As such, it appeared unlikely Boeing would gain any additional contracts for ISS flights when NASA issued a request for information in order to award additional contracts for both entire vehicles for dedicated NASA-ISS flights or individual seats on commercial flights. However, this does not preclude them from further contract extensions once Starliner passes certification.

But it is not all good news for SpaceX. The company is encountering issues in scaling-up production of its Raptor engine – vital for the Starship / Super Heavy vehicles. While it is not clear what the problem(s) is / are, the situation appears dire enough for Musk to issue an e-mail to all SpaceX employs that the company could face bankruptcy if the issue(s) is/are overcome.

How serious his warning is, is not clear – he’s issued similar warnings in the past in order to “motivate” staff – and following the e-mail making headlines, he did start stepping back from some of his comments. However, Raptor production is key to the company’s future: SpaceX is banking on a high cadence of Starship / Super Heavy launches each of which will require a minimum of 35 motors per launch – with periodic swap-outs to be expected, even allowing for their reusability.  As it is, Musk has indicated he would like to hit 26 launches by the end of 2022, although it is not clear if this is combined booster / Starship launches (using a mix of 35 or 39 motors) or a mix of booster / Starship orbital attempts and further Starship high-altitude flight tests (the latter only requiring 3 or 6 motors).

Rocket Labs Provide Neutron Update

SpaceX aren’t the only contender in the US reusable launch vehicle Market. The New Zealand-US based Rocket Lab is already working towards partial reusability with their Electron small payload launcher, and CEO and founder Peter Beck recently provide an update on their Neutron medium-lift vehicle, which includes an entire new look to the vehicle.

The updated vehicle will be made of carbon composite materials (with Beck taking a slight dig at the use of stainless steel as adopted by SpaceX and (now) Blue Origin), and will be of a tapered design with a 7-metre diameter base. This shape is designed to reduce heat loads during re-entry into the atmosphere, with the booster standing on a set of fixed legs on landing.

An artist’s rendering of the Neutron rocket, showing the unique petal-like integrated payload fairings opened to allow for the deployment of the upper stage and payload. Credit: Rocket Lab

Nor does it end there. Neutron’s standard payload to low Earth orbit will be 8 tonnes – marking it as an ideal launcher for the smallsat / constellation / rideshare market. However, this can be extended to 15 tonnes  – although this is in a non-reusable format for the vehicle. But perhaps the most unique aspect of the vehicle is the manner in which it carries payloads when operating as a reusable launcher.

Traditional rockets carry their upper stages and payloads on top, with “throw away” aerodynamic fairings protecting the payload through the ascent through the atmosphere. Neutron, however, features fairings that are integrated into the rocket. These will open like petals around the payload / upper stage to allow them to be deployed, then close again to allow the vehicle to maintain the integrity of its shape through the re-entry phase of its flight through to landing.

An artist’s rendering of Neutron making a return to its launch site. Credit: Rocket Lab

Overall, the hope is that by using 3D printing, carbon composites, reducing the vehicle mass – which reduces the stress placed on the motor systems – and offering a design with a return to launch site capability that does not require complex infrastructure to enable re-use, Neutron will provide Rocket Lab with a significant launch capability at extremely low, high-competitive pricing.

Assuming the original plans for Neutron remain true, the vehicle’s first flight could come in 2024, most likely utilising the facilities Rocket Lab has been developing at NASA’s Wallops Island, Virginia, launch centre.