The art of SL14B in Second Life

SL14B Community Celebration; Inara Pey, June 2017, on Flickr SL14B Community Celebration

Art in all its forms has always tended to be a part of the SL14B Community Celebration, and this year is no exception. In fact, art is well represented, with the familiar four art parcels around the Cake Stage, and further art parcels within each of the exhibition regions, all of which are in addition to the individual art displays to be found among the exhibitor spaces.

In the run-up to the SL14B gates opening, I was able to visit many of the art displays and installations on offer, and while this is not intended to be an extensive list / set of reviews, I thought I’d highlight those I particularly enjoyed visiting.

Illusion by Solkide Auer and Magda Schmidtzau

Location: SL14B Spectacular art parcel.

You’ll need a little viewer set-up to appreciate this piece, but the effort is more than worthwhile, as the installation is a grand demonstration of projected lights and images. In short, set your time of day to midnight and make sure Advanced Lighting Model (ALM) is active via Preferences > Graphics. If the latter gives you performance issues, try ramping down your draw distance (note you do *not* need to have Shadows enabled as well; but ALM is required to see the effects – without it, you’ll just see blank walls).

Illusion by Solkide Auer and Magda Schmidtzau – SL14B Spectacular

Before you step through one of the four Anywhere doors ranged before you at the landing point, make sure you cam up and catch the play of projected lights on the structure. Then when you’re ready, pick an Anywhere door, click it to open it, and click on the exposed wall to teleport up into the structure. The doors deliver you to the various levels, where you can enjoy the marvel of projected images set within individual “rooms”, each group of images offering glimpses of a setting / story.

A clever and vibrant use of projected lights and images, wrapped around an imaginative means of presenting art.

TJ’s Mediamagic – Thoth Jantzen

Location: SL14B Captivate art parcel.

Full disclosure time: I think Thoth is one of the most engaging and imaginative multi-media artists in Second Life; as such, his installations tend to be a must-see, although some caution my be warranted with this one if you can be adversely affected by flashing images and lights.

TJ’s Mediamagic! by Thoth Jantzen – SL14B Captivate

There is a certain amount of set-up to be done to properly appreciate Mediamagic! Information boards provide the full details, but the essentials are: set your time of day to Midnight, make sure you have Advance Lighting Model enabled  (Preferences > Graphics), set media to autoplay, and allow scripts to play media. An information kiosk will also provide you with the information needed to enjoy the installation as well as some gifts from Thoth.  Once you are set, explore, enjoy the use of light and sound, and do make sure yo visit the upper levels (steps and then TP). If you can, be sure to cam  / flycam out from within the build to fully appreciate the play of lights.

Tornado To Oz by Noke Yuitza

Location: SL14B Enchant

Another piece best seen at Midnight and with ALM enabled, this is a beautiful piece in both its execution and its simplicity. Description isn’t necessary – just enjoy.

Tornado To Oz by Noke Yuitza – SL14B Enchant

What is SL Without Artists? – The Dirty Grind

Location: SL14B Beguile art parcel.

While not the easiest environment to navigate at times (blame that on the people teleporting in and out of these busy regions more than anything else), the Dirty Grind’s homage to art – visual and musical – might seem self-centred, but as a community it cannot be denied they’ve done a heck of a lot to promote arts over the years. As such, this retrospective, carrying with it a reminder that SL is unique among all forms of artistic presence / expression, simply because it can instantly and immersively bring people from all over the world together to enjoy a moment of that expression.

CarnivALL Boudicca Amat

Location:  SL14B Wonderous.

“Second Life is a place that allows us to spread the wings of our imagination and let it take flight…” Boudicca tells visitors who enter her gallery space. “Our only limit is our imagination.”

Having a little fun with myself at Boudicca Amat’s CarnivALL – SL14B Wonderous

Within the gallery, Boudicca offers her take on the ideals of carivalesque – the literary style that uses humour and chaos to subvert the more dominant style or approach of a piece – through a series of trompe l’oeil art displays.

This approach to SL art is perhaps most famously exemplified in the works of Molly Bloom (whom I’ve covered extensively in the blog, and offer this link as a reminder of her work). It’s not necessarily an easy art form to bring together in Second Life, but Bou does so with grace and panache. What’s more, she offers a studio within the gallery where you can have a go yourself ! I had fun (with a quick bit of post-processing) in duplicating myself with two of the displays available to visitors, rather than going for a single 3D look to an image 🙂 .

Inside Art by Ginger Lorakeet

Location: SL14B Spectacular.

On the subject of the trompe l’oeil style of art, Ginger Lorakeet has been a part of the SLB scene for as long as I can remember. She’s back this year, once again offering her interactive art pieces – some of which have been seen at past events, others of which are new.

I always like to mention Ginger’s work at SLB events as her art is fun and interactive. Simply find a picture you like, click it, and add yourself to it. With a little camera jiggling, you can grab a photo of yourself in a photo / picture. In addition, this year Ginger offers visitors the chance to fully immerse themselves in a scene.

Masked: Carnevale di Venezia by Catalina Staheli – SL14B Beguile

These are far from the only art exhibits to be found at SL14B, and as much as I’d like, I don’t have the room to go through them all. I would, however, just like to mention in passing Kody Meyers, Anibrm Jung, Catalina Staheli,  John Brianna and Graham Collinson, all of whose work I appreciate, and all of whom are also exhibiting at SL14B. Be sure the check-out the SL14B Art Parcel SLurls and the complete list of exhibitors to make sure you catch everyone.

2017 Viewer release summaries week 24

Logos representative only and should not be seen as an endorsement / preference / recommendation

Updates for the week ending Sunday, June 18th

This summary is published every Monday, and is a list of SL viewer / client releases (official and TPV) made during the previous week. When reading it, please note:

  • It is based on my Current Viewer Releases Page, a list of all Second Life viewers and clients that are in popular use (and of which I am aware), and which are recognised as adhering to the TPV Policy. This page includes comprehensive links to download pages, blog notes, release notes, etc., as well as links to any / all reviews of specific viewers / clients made within this blog
  • By its nature, this summary presented here will always be in arrears, please refer to the Current Viewer Release Page for more up-to-date information.

Official LL Viewers

LL Viewer Resources

Third-party Viewers

V5-style

V1-style

  • No updates.

Mobile / Other Clients

  • No updates.

Additional TPV Resources

Related Links

SL14B: Meet the Lindens

SL14B Community Celebration; Inara Pey, June 2017, on Flickr SL14B Community Celebration

Alongside all of the resident-led events and activities planned to mark SL’s 14th anniversary, one set of events are liable to draw considerable interest from Second Life Users: the round of Meet the Linden sessions hosted at the SL14B Auditorium.

As with recent SLB events, Meet the Lindens will comprise one session a day, from Monday, June 19th through Thursday, June 22nd, and offer Second Life users the opportunity to hear from – and likely ask questions of – Linden Lab staff.

Patch and Dee Linden with Saffia Widdershins (l) and Zander Greene (r) at Meet the Lindens event during SL13B in 2016

This year all of the Meet the Linden sessions will take place between 14:00 and 15:00 SLT, with the schedule lining up as follows.

Day (14:00 – 15:00 SLT) Lindens
Monday 19th June Patch Linden, Senior Manager, Product Operations, and Dee Linden, Land Product Specialist
Tuesday 20th June Landon Linden, VP of Operations and Platform Engineering; Oz Linden, Technical Director, Second Life
Wednesday 21st, June Xiola Linden, Lead Community Manager
Thursday 22nd June Oz Linden, Technical Director for Second Life and Grumpity Linden, Senior Producer at Linden Lab

Again, all these sessions will take place at the SL14B Auditorium.

Revised after realising slight opsie with the dates…

SL14B: Celebrating Second Life

SL14B Community Celebration; Inara Pey, June 2017, on Flickr SL14B Community Celebration – click any image for full size

Second life celebrates its 14th year as an open virtual world on Friday, June 23rd, 2017. This means that once again, the Second Life Birthday Community Celebration is taking place in-world to mark the platform’s anniversary.

SL14B officially opened its gates at midday SLT on Sunday, June 18th, and events run through until Sunday, June 25th. The regions will then be open for viewing for a further week, although there will be no major entertainments or activities during that time. I’ve been fortunate enough to help out in the background for the event, and so have been watching the infrastructure and exhibitor builds take shape, and I have to say that people have really risen to this year’s theme of Carnivaleqsue.

The infrastructure builds at this years events comprise the expected roads and stages – the Cake Stage, Live Stage, DJ Stage and Stage Left – together with the Auditorium build, Welcome Area, Time Capsules display, and Max Mystery Land. With the exception of the Tim Capsules display, each covers between one and two regions (with the Cake Stage centred on its usual four regions), and offer some amazing interpretations of the celebration theme, and I have little doubt they’ll all be seeing a lot of use during the festivities.

SL14B Community Celebration; Inara Pey, June 2017, on Flickr SL14B Community Celebration

For the DJ Stage, Cynimon Catnap offers  a lush forest environment with tall trees and rich colours – and which hides what feels like an entire circus within it. Giraffes offer a welcome, giant carved lions give airborne acrobats the chance to test their skills, while paths wind among the trees, leading the way to carousels, Ferris wheels, bumper cars – and hidden glades where people can escape the inevitable rush. And, of course, topping  it all, literally as well as figuratively, is the DJ Stage, standing atop – what else? – the circus ringmaster’s beautifully adorned top hat!

Facing the DJ Stage across the width of the SL14B regions is the Welcome Area, by Darkstone Aeon. This is intended to be the starting point for visits to SL14B, containing information, Teleport boards, details of scheduled events and more. All this is set within a rocky environment, with an oriental lean to it. Great Chinese-style dragons (always at the centre of festivals) undulate over and through (literally!) the landscape, or stand on high peaks keeping an eye on everything. Follow the steps cut into the rock and the paths and ways carefully, for there is much to see here. Should you grow tired, or wish an alternate view of the region – be sure to take one of the dragon or balloon rides!

SL14B Welcome Area and Teleports; Inara Pey, June 2017, on Flickr SL14B Welcome Area and Teleports

To the south, and between both the DJ Stage and the Welcome Area, you’ll find the Auditorium, once again built by ADudeNamedAnthony. This year we have a design of clean, modern lines which carry within them a hint of Art Deco. Surrounded by broad avenues and bracketed by parkland, the Digital City venue would look at home in almost any city environment. Within it can be found the main auditorium, which will be home to talks and presentations throughout the week, supported by two smaller forum halls.

South of the Auditorium rises the Cake Stage. This is once again another of Mikati Slade’s gloriously colourful and distinctive designs, occupying the central corners of four adjoining regions. It will feature many activities and parties throughout the week including the Lab’s Masked Ball (Monday, June 19th 11:00 13:00 SLT) and Come As You Were party (Wednesday, June 21st 18:00 – 20:00 SLT) – find out more about these two events here.

SL14B Auditorium; Inara Pey, June 2017, on Flickr SL14B Auditorium

East of the Cake Stage, and occupying two regions, is the Live Music stage, designed by Chic Aeon. A curious design, the live stage sits within a mini urban setting which merges glowing building blocks with Monopoly like buildings. Caught in darkness (set your viewer to midnight if your environment doesn’t automatically change), it offers the neon feel of a city, beyond which, when facing the right direction, the glowing mass of the Cake Stage rises.

To the west and a little south of the Cake Stage is Stage Left, designed by Faust Steamer, and while I shouldn’t perhaps have favourites, I have to say it is one of the two infrastructure builds I particularly like at SL14B. Those who recall Faust’s Stage Left from SL13B are sure to be blown away by this year’s design, which again takes a fantastical twist on the carnivale theme for the celebrations, throwing in a Hindu incarnation of Cerberus, together with some Chinese influences.

SL14B Stage Left; Inara Pey, June 2017, on Flickr SL14B Stage Left

The scale of this build is just amazing; to really appreciate it, you have to cam out; to understand the sheer power evoked by it, simply stand next to the teleport dias / pool and look up as the great armoured beast lowers its middle head to look at you. This build also uses a local experience for teleporting – jump into the teleport pool and allow the experience too be lifted to the stage up on the beast’s broad back.

The other build we particularly enjoyed in our pre-opening ramblings and photo-gathering is the Max Mystery Land (aka Community Park), designed by Lim Pikajuna. Occupying a single region at the southern end of the Community Celebration estate, this offers all manner of entertainments above ground, in the air, underground and even under water. A theme park on (and in) a mountain, Max Mystery presents visitors with sky cars, go karts, pedaloes, boat rides, underwater bumpers cars, a disco, a mono-rail – there’s even a chapel!

SL14B Max Mystery Land; Inara Pey, June 2017, on Flickr SL14B Max Mystery Land

In addition to all this comes the exhibitor builds and displays. As usual, these are an eclectic, tumbling mix of designs and expressions, encompassing art in all its forms, promoting communities, commemorating individuals, showcasing skills, and of course offering fun and amusement or opportunities for quiet contemplation. Many have entered into the theme of the celebrations with gusto and imagination, making wandering the exhibitor regions a delight. Some have opted for displays pretty close to previous years’ offerings, and one or two still have yet to learn that slapping textures on prims that reach up into the sky might be eye-catching, but not necessarily in a positive way.

I’ll have more to say on exhibits and art at SL14B in the week. For now, I’ll leave you with the key SLurls – you can find a full list on the SL14B website, where you can also find the celebrations schedule (use the drop-down menu for individual stage, etc., schedules).

SL14B Core SLurls

All regions rated General.

Tales for the young at heart and more in a farewell to Bradley University

It’s time to kick-off another week of storytelling in Voice by the staff and volunteers at the Seanchai Library. As always, all times SLT, and events are held at the Library’s Second Life home at Bradley University, unless otherwise indicated.

Sunday, June 18th

13:30: Tea-time with Dad: Gemma’s Choice

John Morland reads Kipling’s Just So stories.

18:00: The Wind in the Willows

Meet little Mole, wilful Ratty, Badger the perennial bachelor, and petulant Toad. Over one hundred years since their first appearance in 1908, they’ve become emblematic archetypes of eccentricity, folly, and friendship. And their misadventures – in gypsy caravans, stolen sports cars, and their Wild Wood-continue to capture readers’ imaginations and warm their hearts long after they grow up.

Begun as a series of letters from Kenneth Grahame to his son, The Wind in the Willows is a timeless tale of animal cunning and human camaraderie – although some in current times unkindly see it as a kind of allegory for the privileged ne’er-do-well upper class (in the form of Toad) with the aid of the middle class (Badger, rat and Mole) to keep the proletariat (weasels and stoats) in their place.

I suggest you join Caledonia Skytower for Magicland Storytime, and go with Mr. Grahame’s intention with the tales – as a ripping yarn for young hearts and minds.

Monday, June 19th 19:00: The Book of Skulls

Gyro Muggins reads Robert Silverberg’s novel.

Four friends, college room-mates, go on a spring break trip to Arizona: Eli, the scholar, who found and translated the book; Timothy, scion of an American dynasty, born and bred to lead; Ned, poet and cynic; and Oliver, the brilliant farm boy obsessed with death.

Somewhere in the desert lies the House of Skulls, where a mystic brotherhood guards the secret of eternal life. There, the four aspirants will present themselves–and a horrific price will be demanded.

For immortality requires sacrifice. Two victims to balance two survivors. One by suicide, one by murder.

Now, beneath the gaze of grinning skulls, the terror begins. . . .

Tuesday, June 20th 19:00: The Ordinary Princess

Faerie Maven-Pralou reads MM Kaye’s 2002 novel.

In true fairytale style, the seventh princess is blessed with gifts by a host of fairies, but as her father fears, it goes wrong and one slightly bitter fairy ‘blesses’ her with ordinariness.

So no golden curls, stunning beauty and sublime grace for Princess Amethyst Alexandra Augusta Araminta Adelaide Aurelia Anne. Her dark hair and freckles make Amy (no ordinary princess can be called anything else) stop every suitor from pursuing her. She decides to run away and make her own life, away from boring princes and a confined life.

A life in the forest is bliss, but eventually Amy realises she will need some money, and must find work. So it is that she becomes the fourteenth assistant kitchen maid at a neighbouring palace. And there  – much to everyone’s surprise – she meets a prince just as ordinary (and special) as she is!

Wednesday, June 21st 19:00: The Girl Who Drank the Moon

Caledonia Skytower reads Kelly Barnhill’s 2017 Newbery Medal winner.

Every year, the people of the Protectorate leave a baby as an offering to the witch who lives in the forest. They hope this sacrifice will keep her from terrorizing their town. But the witch in the forest, Xan, is kind and gentle. She shares her home with a wise Swamp Monster named Glerk and a Perfectly Tiny Dragon, Fyrian.

Xan rescues the abandoned children and deliver them to welcoming families on the other side of the forest, nourishing the babies with starlight on the journey.

One year, Xan accidentally feeds a baby moonlight instead of starlight, filling the ordinary child with extraordinary magic. Xan decides she must raise this enmagicked girl, whom she calls Luna, as her own.

To keep young Luna safe from her own unwieldy power, Xan locks her magic deep inside her. When Luna approaches her thirteenth birthday, her magic begins to emerge on schedule–but Xan is far away. Meanwhile, a young man from the Protectorate is determined to free his people by killing the witch. Soon, it is up to Luna to protect those who have protected her–even if it means the end of the loving, safe world she’s always known.

Thursday, June 22nd 19:00: Ron Rash’s The Southern Thing

With Shandon Loring.

 

Seanchai Moves To Holly Kai Park

This week marks Seanchai Library’s last week of reading at Bradley University. From Sunday, June 25th, Seanchai Library will commence reading from their new home at Holly Kai Park – read the official press release and the Holly Kai blog post for more.

Seanchai Library at Holly Kai Park

 


Please check with the Seanchai Library’s blog for updates and for additions or changes to the week’s schedule.

The featured charity for May through July is Alex’s Lemonade Stand Foundation, raising awareness of childhood cancer causes and funds for research into new treatments and cures.

SL project updates 24/3: TPV Developer meeting

Le Sixième Sens, Les Reves Perdus; Inara Pey, June 2017, on Flickr Les Reves Perdus – blog post

The majority of the notes in this update are taken from the TPV Developer meeting held on Friday, June 16th, 2017. The video of that meeting is embedded at the end of this update, my thanks as always to North for recording and providing it. Timestamps in the text below will open the video in a separate window at the relevant point for those wishing to listen to the discussions. Note that the timestamps may not be in chronological order, reflecting the fact that some topics were discussed more than once during the course of the meeting.

Server Deployments, Week 24 – Recap

As always, please refer to the server deployment thread for the latest information.

There was no deployment to the main (SLS) channel on Tuesday, June 13th. Nor, as the channel was updated in week #23, was there a restart.

On Wednesday, June 14th, two of the server RC channels were be updated as follows:

  • LeTigre received a new server maintenance package (#17.06.12.327066), comprising additional internal logging and features and improvements to region start
  • BlueSteel received a new server maintenance package (17#17.06.13.327122) containing internal fixes

[15:20] The Magnum RC was initially updated with a newer version of the new operating system update (#17.06.12.327060), which included a fix for BUG-100737 “Shoutcast receivers unable to relay on RC Magnum” (see part 1 of this report for more on this issue). However, this deployment had to be subsequently rolled-back as the corrective intent of the BUG-100737 didn’t work as expected. This update will likely be re-deployed to Magnum ion week #25 (commencing Monday, June 19th).

SL Viewer Pipelines

Asset HTTP Viewer

[1:39] The Asset HTTP viewer should be promoted to release status at the start of week #25 (week commencing Monday, June 19th). The promotion has been delayed while the viewer goes through a complete regression test (something the Lab does every X number of viewer releases).  This viewer sees delivery of all remaining asset types (wearables, gestures, animations, sounds, etc) over HTTP via the CDN.

[11:39] This viewer should hopefully see faster first-time playback of sounds and animations, as these will be obtained via the CDN, which should be faster than being obtained through the simulator. It also means obtaining assets should also be a lot more reliable when you’re in a busy region, because – again – the assets are not coming via the simulator, but through a CDN node.

The Lab will – several months hence from now – remove the server-side UDP messaging support for these asset types. This will in turn mean that any viewers not updated to the HTTP support at the time the messaging is removed from the simulator will no longer be able to receive these asset types.

Maintenance RC Viewer

[5:25] The Maintenance RC viewer updated on Thursday, June 15th to version 5.0.6.327125. This includes an update to prevent the viewer crashing if it receives a UDP message from the simulator that it doesn’t recognise, by having the viewer ignore all unrecognised messages.

Voice RC Viewer

[5:04] The Voice RC viewer has been updated, but the update has a high crash rate and so the update is unlikely to see the light of day.

Alex Ivy 64-bit Project Viewer

[2:23] The next version of the 64-bit project viewer is completing testing. This includes the new Windows SL Launcher and updater, together with a 64-bit version of the Havok sub-libraries. As noted in my last TPV Developer meeting update, the launcher is essentially a 32-bit executable that checks a Windows system to see if it is 32-bit or 64-bit, and then endeavours to download the correct version (32- or 64-bit) of the viewer if an update is available, install it and then launch it. SL Launcher is only required for Windows as the Mac version of the viewer will only be provided in 64-bit once the Alex Ivy viewer reaches release status.

A follow-up build for RC release has apparently been built, and this should appear soon after the project update, and work has commenced on updating the wiki build instructions for building the viewer to match the 64-bit build process.

[38:26] The wiki instructions are being updates to reflect the requirements of the 64-bit build, so care should be taken when following them for other builds.

360-degree Snapshot Project Viewer

[6:21] The 360-snapshot viewer is now up-to-date and includes code to generate a 360 equirectangular images and their metadata, which can then be uploaded to suitable websites supporting 360-images. The update will appear once it has cleared the Lab’s QA testing.

There is still further work to be done on this viewer – the UI is going to be updated to allow integrated uploads of 360-images to SL Place Pages (and this may be done for Flickr, etc), and SL Place Pages will be updated to accept 360-degree images from the viewer.

TP Throttle

[13:28] The Lab is still looking at throttling the speed at which teleport requests can be re-tried when trying to access a busy region. An initial change is currently on the LeTigre RC, and further changes are liable to be made. As previously noted, these updates shouldn’t impact manual teleports, but may affect teleport HUDs which are scripted to repeatedly re-try teleports in rapid succession until one is  successful (requiring the scripts running them to be modified so they don’t exceed the throttle).

This change is being made because a high incidence of failed teleport requests hitting a busy region places an additional load on the region’s simulator, adversely affecting performance for those already in the region.

Other Items

Uploading Meshes Rigged to Attachment Points

[17:48] This subject came up at the Content Creation User Group meeting as a part of the discussion on animating weapons to follow hands. There was some confusion on whether mesh objects rigged to attachment points could be uploaded, after it was reported that the LL viewer supported it, and Firestorm didn’t (see FIRE-21000 – which now has a fix).  While there is a server-side validation error which can cause some issues when uploading meshes (fix in progress) which might cause upload problems, it is believed that the current behaviour here should be that new objects rigged to attachment points should be blocked from upload, but existing items rigged to attachment points previously uploaded to SL will still work.

Supplemental Animations and Animation Priorities

[24:17] The question was asked if there was any historic reason for not being able to change the priority of an animation post upload (see SVC-8094). It is thought this might be because the priority is set within the animation asset, which cannot be edited. However, it is hoped the forthcoming server-side supplemental animation updates will help eliminate some of the conflicts created by priority clashes.

Providing a Means to Compile Experience Scripts in the User’s Inventory

[35:21] Some people working collaboratively on experiences are finding it problematic when having to update scripts used by the experience, but which are contained in another user’s objects for that experience, as it requires a lot of swapping and changing, rather than simply editing the script in question (see BUG-8180).

While the Lab understands these difficulties, it was a conscious decision to have experience management work as it does, and while at some point in the future they might revisit things, doing so isn’t on the short-term roadmap.

Resetting Scripts in No-Mod Objects

[36:47] This is a request the Lab is unlikely to implement, because it would violate the expectations of the script authors.