Tales of travel through time, allegories and a battle

Posted on by Inara Pey
Seanchai Library

It’s time to highlight another week of storytelling in Voice by the staff and volunteers at the Seanchai Library. As always, all times SLT, and events are held at the Library’s home in Nowhereville, unless otherwise indicated. Note that the schedule below may be subject to change during the week, please refer to the Seanchai Library website for the latest information through the week.

Monday, March 7th, 19:00: A World Out of Time

After being cryogenically frozen in the 1970s to await a cure for his (then) incurable cancer, Jaybee Corbell awakes after more than 200 years – to find his own body destroyed and his mind and memories transferred into the “mindwiped” body of a criminal. And that’s is not all that has changed: the Earth is now overseen by an oppressive, totalitarian global government called “The State”, and Corbell’s existence is to be determined by a “checker”; if he is found wanting, he will be discarded.

However, Peerssa, the checker, recommends Corbell as ideal fodder in The State’s attempts to seek out exoplanets suitable for terraforming – whether he wants to join the programme or not. Disgusted by his treatment, Corbell works out a way to take control of his one-person ship on its otherwise one-way mission, and heads toward the galactic core. Entering suspended animation, he is unaware his vessel skims close enough to the super-massive black hole at the centre of the galaxy to experience time dilation.

Emerging from his suspended state, and believing only 150 years have passed, Corbell returns to the solar system to find it again vastly changed: more than three million years have passed, and the Sun has become a bloated red giant, and Earth – well, Earth appears to have been relocated to an orbit around Jupiter, whilst humanity itself had endured extensive changes; and Corbell must face an entirely new set of challenges if he is to survive.

Gyro Muggins resumes reading Larry Niven’s novel.

Tuesday, March 8th

12:00 Noon: Russell Eponym

With music, and poetry in Ceiluradh Glen.

19:00: Haroun and the Sea of Stories

Caledonia Skytower reads the fifth of Salman Rushdie’s major publications and his first since The Satanic Verses. 

Written for the younger reader, but with plenty with it suited to older ears, it is of an allegorical nature and addresses a number of societal problems, particularly those found in the Indian subcontinent.

Dedicated to Rushdie’s son, the book looks at the issues it raises – including that of censorship (unsurprisingly, given the reaction following the publication of The Satanic Verses in 1988) – through the eyes of Haroun Khalifa, the son of a doctor and master storyteller.

Both father and son are struck by afflictions related to Haroun’s mother deserting them; Haroun has a form of attention-deficit disorder, whilst his father is prone to bouts of depression. Both can only be relieved of their afflictions should Haroun’s mother, Soraya, return.

Before then, however, Haroun is set for an adventure and discovery.

Thursday, March 4th 19:00: Irish Legends: The Battle of Clontarf

On April 23rd 1014, an army by Brian Boru, High King of Ireland clashed with one comprising the combined forces of Sigtrygg Silkbeard, King of Dublin; Máel Mórda mac Murchada, King of Leinster; Sigurd of Orkney and Brodir of Mann. It is said to lasted from sunrise to sunset, with army of Brian Boru routed the Irish-Viking alliance to declare victory, although up to 10,000 were killed on both sides – including Boru and both his son and grandson.

The battle was an important event in Irish history and is recorded in both Irish and Norse chronicles. In Ireland, the battle came to be seen as an event that freed the Irish from foreign domination, and Brian Boru was hailed as a national hero, with the man and the battle becoming the stuff of legend, bring seen as an ending of foreign dominion (in this case the Vikings) over Ireland and becoming something of a rallying call during the English rule in Ireland. However, historians would dispute this, seeing it as more of an Irish civil war, with Norsemen actually fighting on both sides.

But however one views it, there is no doubting the battle has become the stuff of legend, and Shandon Loring brings us the tale in voice.

2022 viewer release summaries week #9

Posted on by Inara Pey
Logos representative only and should not be seen as an endorsement / preference / recommendation

Updates from the week ending Sunday, March 6th, 2022

This summary is generally published every Monday, and is a list of SL viewer / client releases (official and TPV) made during the previous week. When reading it, please note:

  • It is based on my Current Viewer Releases Page, a list of all Second Life viewers and clients that are in popular use (and of which I am aware), and which are recognised as adhering to the TPV Policy. This page includes comprehensive links to download pages, blog notes, release notes, etc., as well as links to any / all reviews of specific viewers / clients made within this blog.
  • By its nature, this summary presented here will always be in arrears, please refer to the Current Viewer Release Page for more up-to-date information.
  • Note that for purposes of length, TPV test viewers, preview / beta viewers / nightly builds are generally not recorded in these summaries.

Official LL Viewers

  • Release viewer: version version 6.5.3.568554 – formerly the Maintenance J&K RC viewer, promoted Monday, February 28 – no change.
  • Release channel cohorts:
    • No updates.
  • Project viewers:
    • No updates.

LL Viewer Resources

Third-party Viewers

V6-style

  • Kokua updated to version 6.5.3.48436 (non RLV) and 6.5.3.51729 (RLV variants) on March 5th – release notes

V1-style

  • No updates.

Mobile / Other Clients

  • No updates.

Additional TPV Resources

Related Links

Quadrapop’s Art is What You Make It in Second Life

Posted on by Inara Pey
Ribong Gallery Artspace – Quadrapop Lane: Art is What You Make It

I’m starting this article with an apology for San (Santoshima), curator / owner of Ribong Gallery. In mid-February, she sent me an invite to attend Art is What You Make It, the (at the time) new exhibition by Quadrapop Lane … and I managed to mis-file it in inventory. As a result, I am late getting to it and writing about it – but the exhibition is currently still open and well worth viewing.

The easiest way – to a point – of explaining this installation is to use Quadrapop’s own words:

Art is What You Make It is an installation of art made from other art, starting with textures used on prims, mesh and particles from quad’s RL photos, designs created in photoshop, digital drawings, and quad’s physical drawings and paintings. These images are often recycled through SL screen shots that may further be manipulated and uploaded as textures.
The images have been altered and recycled repeatedly so that their source is often unrecognizable to the maker: Art is built of layers of experience, personal and cultural, built on an artist’s response to the world. The results may bear no resemblance to the initial motivation or concept.

– Quadrapop Lane

Ribong Gallery Artspace – Quadrapop Lane: Art is What You Make It

The result is a walk through 2D and 3D art that is genuinely and stunningly visual. There are elements of animation,  abstraction , particle and physical art. To see it at its best, you’ll need a reasonable Draw Distance (96m recommended) and have Advanced Lighting Model (ALM – Preference → Graphics → make sure the option is checked). The installation is divided into six areas – four on the same level, which can be visited in a counter-clockwise direction and end with a surprise (take the angled tunnel).

These four areas include 2D, 3D and animated art pieces by Quadrapop (with the latter including particle emitters). ALM is required as projectors are used throughout, so without the option being enabled, you’ll miss a lot. A spiral ramp rising from the centre on the four rooms, rising to a mezzanine level with further art, including a walk-through element which can be intense in terms of the lighting, and a marvellous 3D animated fresco hanging in space.

Ribong Gallery Artspace – Quadrapop Lane: Art is What You Make It

The remaining level is reached via teleport from the lowest level (look for the TP disk on the four of one of the rooms), and takes the form of a maze-like walk through light to the centre and the TP back to the low level.

Describing all that is here is a little wasted, as this is an entirely visual installation, one fully deserving to to be seen and enjoyed. So I’m going to shut up now and encourage you to visit while there is time enough to enjoy Quadra’s work for yourself.

Ribong Gallery Artspace – Quadrapop Lane: Art is What You Make It

SLurl Details

The natural beauty of Hera’s Shangdu in Second Life

Posted on by Inara Pey
Shangdu, March 2022 – click any image for full size

On Sunday, March 6th, Hera (Zee9) opened a new setting for people to visit and appreciate. Called Shangdu, its name might for some call forth thoughts of the original northern capital of the Yuan dynasty, the successor to the Mongolian Empire as founded by Kublai Khan; a place we in the west perhaps more familiarly know as Xanadu.

However, this build is not in any way reflective of, or inspired by, the words penned by Samuel Taylor Coleridge in his poem Kubla Khan, itself the result of an opium-fuelled dream, or anything to do with the city. Whilst fantastical in nature, the poem is nonetheless rooted in descriptions that, passing by way of Samuel Purchas (from whom Coleridge might be said to have gained his opening line for the poem, Purchas having written In Xandu did Cublai Can build a stately Pallace) all the way to Marco Polo, who did visit the fabled city some time in the late 1270s.

Shangdu, March 2022

Instead, Hera uses the name Shangdu to evoke a sense of the Yuan period, and to evoke a feeling of natural beauty, rather than the artificial opulence born of Coleridge’s poem or Purchas’ words.  In fact, what we have here is a painting in 3D, a watercolour we can walk through.

The difference here being the opulence is in natural beauty. I first did this about 20 years back in Unreal Tournament; I was looking for something completely different to create and I found these beautiful paintings of a Chinese water Village. [However,] this is a complete fantasy, I have not tried for any particular accuracy in the buildings, although the textures are all taken directly from photos of the village.

Hera (Zee9)

Shangdu, March 2022

The setting presents a walled village through which narrow canals run to both feed and be fed by a moat that encompasses around two-thirds of the village as its sits beyond the high walls and which is it turn directly fed from falls dropping from the northern-western uplands that cup the remaining corner of the village.

The landing point sits as the exit of a tunnel, a rutted track running from it to curve gently to the only landward gate into the village, presided over by an imposing gatehouse ready to defend the wooden bridge below. The tunnel offers the sense that visitors are travellers – perhaps on the Silk Road and following Marco Polo, even if this is not the Shangdu – coming to this place after a long journey.

Shangdu, March 2022

With watch towers sitting notably on the north and east walls of the settlement, it’s clear where the greatest threat to its security might originate – not that this is a particularly a place of war; far from it in fact: the overall impression is that this is a place that might be linked to fishing for sustenance, given the eastward lake sitting beyond the walls, and where at least one silk trader has established a presence, whilst in another resides an artist. However, outside of these and the local temple and a house, the majority of the building here are façades rather than furnished places.

But having so few interiors to explore in no way detracts from the setting; rather, it helps spur the imagination as to might otherwise lie behind the doors to the houses and other buildings, allowing us to add to Hera’s 3D painting with the colours of our own imaginations. As we wander along the narrow streets, cross the wooden and stone bridges, passing under blossoming trees and by stone seats and wooden benches, it is hard not to imagine the local denizens also passing along the same cobbled ways, the smells and sounds of cooking coming from within different abodes, mixed with the sounds of animals in the little yards and the shouts of merchants and other echoing down the alleyways.

Shangdu, March 2022

For those prepared to look for them – but within the village walls and beyond – lay places to sit and / or mediate. Signalled by the presence of small pillows, some of these are relatively easy to find, but one might require some care spying to locate 🙂 .

Set within its own EEP Day Cycle, as used in the images in this article, and including both an ambient sound scape and an appropriate music streams for those who would care to listen as they explore, Shangdu is another superb design and gift to all of us from Hera. Should you drop in, do please consider making a donation to the heron at the landing point to help Hera with the costs involved in building her creations (again, note that is common for Hera, the buildings to be found within the village are all of her own creation).

 

SLurl Details

  • Shangdu (Island of Jahesa, rated: Adult)

A further look at the Newbrooke Linden Homes Theme

Posted on by Inara Pey
Newbrooke – Coniston rear view

On Thursday, March 3rd, Linden Lab released the Newbrooke theme of Premium Membership Linden homes, which I’d previously previewed in December 2021, and took another quick look at the release just after it was announced.

As noted in the latter of the above two articles, the preview was very quickly withdrawn for “updates” – although I could (on the surface at least) see what was different between the release versions and those in the preview. Anyway, for only the third time since Bellisseria – the “home continent” for Linden Homes started rolling out, the new designs were enough to encourage me to make the move (I’ve previously held a houseboat – which I personally feel is still the best of the themes when it comes to making something of a unique mini-home in SL, as they offer the broadest opportunities for modding their interiors with additional walls, floors, etc., – and a Stilt Home.

The “good” points about these houses are the fact they are very light and airy – a lot of windows, and a good set of variants in overall style; the mix of houses sized for a 512sq m parcel sitting on a 1024 sq m parcel offers plenty of exterior scope – and some are already starting to take advantage of that. As well as the various house styles, these home come with there own contents pack, which includes a range of furnishings (indoor and out), all very basic and nothing to write home about; together with plants and planets and things like additional wall / fence panels for those who wish to either add a boundary to their land or do something else with them (patio walls, exterior dividers, etc.).

One thing that did strike me as new – although not having held a Chalet theme home and not being a regular on the SL forums, I’ve no idea if this is new to the Newbrooke Theme, or first surfaced with the Chalets – is the updated means of changing the colours of the interior walls directly through the use of RGB codes or the use of a colour picker HUD in addition to the usual selection of colour presets presented by a dialogue box.

The personal colour options for re-tinting the internal wall of the rooms in each house style

As with the pre-sets, the custom colours option works on a per-room basis, and is accessed via the My Colors button in the dialogue displayed by the house controller panel. For those with Linden Homes who have not previously seen this, the image above provides an overview.  The only addition is that when you click the Type <RGB> button, an input dialogue is displayed, requesting the desired RGB values.

Obtaining one of the homes also gave me a light bulb moment as to why these have been referred to as “container homes”. This is because as well as changing the exterior wall colours (as per other Linden Homes I’m familiar with through ownership) you can change the appearance to the finish of some of the wall elements – which I think is new with this release as an option. The three choices are: stucco (default on rezzing), wood, and metal (hence “container”).

I have to admit that while an interesting ability, I found both the wood and metal finishes a little two “bleah” for my tastes; to my eyes the panels of the forms looks to be too big and the materials finish overblown, and the metal just made the place look weird. As with all the exterior options – colour changing for the brickwork, etc., – these three options are available as presets on the house control dialogue menus.

The three exterior finishes (brickwork is also moddable, but not changed in these images): top – stucco; middle – wood; bottom – metal

After having spent the better part of a day trying to find the best “fit” with the Newbrooke styles (all eight of them), I settled on the Coniston, a 1024 sq m design as initially best suiting my needs – although I am also swayed towards the Heaton as well.

With its large central through-room, the Coniston offered me plenty of space for a living area, display cabinets and a fireplace – and one of my grand pianos. Similarly the second through-room provides a good amount of space for a kitchen and dining area. That said I have to admit to finding some of the rooms in most of the designs to being cramped.

The main room of the Newbrooke – admittedly re-floored

Within the Coniston, for the example, the smallest room looks to make an ideal bathroom – except that when it came to furnishing it, I found myself hearing the imaginary voice of an estate agent (realtor) saying, “Now this is the bathroom. As you can see, there’s room for a toilet and either a vanity unit or a bath…”  While I got things fitted, I did find myself wondering if part of the room size “problem” is down to camera positioning, and the difference between the official viewer’s default and the adjusted, over-the-shoulder views most seasoned users employ, and which can result in cameras ending up on the wrong side of walls in small rooms.

Another slight issue for me with these houses is the use of materials – not that I have anything against materials; it’s just that in places, these do seem overly pronounced  – such as the floorboards, the individual planks of which struck my as looking either poorly laid or poorly finished. Of course, this is somewhat including with the “Contain homes” aspect of the theme – but it would have been nice to have something a little more – graceful – as an option. As it is, I opted to lay my own floors, which can be seen in the images here.

The kitchen with a personal flooring and a divider originally created for the Windlass Houseboat

As is to be expected with a new release of Linden Homes, creators are already busy producing add-on kits for the various styles of Newbrooke homes – and doubtless more will be added in time. However, these are house than anyone with a modicum of building capability can have fun playing with.

But enough for now; suffice it to say, the Newbrooke homes do have a lot going for them, and I’ll likely retain mine for a while, and will likely have a play with at least the Heaton style as well!

 

2022 CCUG and TPVD meetings week #9 summary

Posted on by Inara Pey
Ravenport Reclaimed, February 2022 – blog post

The following notes were taken from:

  • My audio recording and chat log of the Content Creation User Group (CCUG) meeting held on Thursday, March 3rd 2022 at 13:00 SLT. These meetings are chaired by Vir Linden, and meeting dates can be obtained from the SL Public Calendar.
  • My audio recording and the Video recording by Pantera (embedded at the end of this piece) from the Third-Party Viewer Developer (TPVD) meeting on Friday, March 4th, 2022 at 12:00 noon SLT.

This is a summary of the key topics discussed and is not intended to be a full transcript of either meeting in its entirety. However, the video does provide a complete recording of the TPVD meeting, and timestamps to the relevant points within it are included in the notes below.

Available Viewers

[Video: 0:41-2:10 and 7:41-9:00 + notes from CCUG]

This list reflects the currently available official Second Life viewers.

  • Release viewer: version version 6.5.3.568554 – formerly the Maintenance J&K RC viewer, promoted Monday, February 28 – NEW
  • Release channel cohorts (please see my notes on manually installing RC viewer versions if you wish to install any release candidate(s) yourself).
    • The Tracy Integration RC viewer version 6.4.23.563771 (dated Friday, November 5) issued Tuesday, November 9.
  • Project viewers:
    • Performance Improvements project viewer version 6.6.0.567604, dated January 24.
    • Mesh Optimizer project viewer, version 6.5.2.566858, dated January 5, issued after January 10.
    • Performance Floater project viewer, version 6.4.23.562625, issued September 2.
    • Legacy Profiles viewer, version 6.4.11.550519, dated October 26, 2020.
    • Copy / Paste viewer, version 6.3.5.533365, dated December 9, 2019.

General Viewer Notes

  • The release of the Maintenance J&K RC as the de facto release viewer should see crash rates reduced for those on the official viewer (and hopefully for TPVs as the code is adopted).
    • This is the first official viewer to by built using Python 3.x.
    • It includes a fix intended to prevent the updater falling over on Mac OSX.
  • The Performance Improvement viewer is still awaiting RC release, this is pending some final bug fixing.
    • [CCUG Meeting] The Performance Improvements viewer bumps the feature table version number. This means that those placed in the cohort when it goes to RC status will see their custom graphics presets reset (as will anyone else switching to it during RC and when it gets to release status).
  • [CCUG Meeting] It appears the Mesh Optimiser viewer has a bug that is causing it to re-order triangles in an upload. So, if an explicit ordering is contained within a Blender export (e.g. for alpha sorting, for example), the Mesh Optimiser will effective destroy the ordering when running the LOD optimisation on upload. It’s not clear on how widespread the issue might be, as it has only been reported with alchemy-next thus far.
  • [CCUG Meeting] the definitions for “Low”, “medium” and “high” on the graphics slider are being redefined within the Performance Floater project viewer. This will also see the number of non-imposter avatars set on a per detail level, rather than being set to 16 across the board.
  • [CCUG Meeting] the benchmark for determining low-end systems is being adjusted to better reflect the number of uses coming into SL using low-end GPUs.

MFA Viewer

[Video: 9:12-13:42]

  • Summary:
    • Multi-factor authentication (MFA) is coming to the viewer.
    • As MFA is implemented in the official viewer, there will be a “grace” period to allow TPV adopt the viewer code.
    • During this period, users will be able to access SL on TPVs as they currently do now, regardless of whether or not they have opted-in to MFA.
    • After this “grace” period, all users who have opted in to MFA will be required to authenticate themselves when using any viewer to log-in to Second Life (with the usual 30-day period of valid authentication, as per secondlife.com MFA), but those who have not opted-in to MFA will see no difference in their log-in steps, regardless of whether the viewer they are using supports MFA.
  • The viewer-side code is currently going through QA. If is passes, it is hoped it will surface in week #10 (commencing Monday, March 7th).
  • However, the decision has not yet been taken as to give it a dedicated viewer, or to merge the code into the next upcoming Maintenance RC viewer.

In Brief

From the Content Creation Meeting

  • Viewer project work: the focus is on getting the Performance Improvements viewer stabilised and promoted to RC status (and thence to de facto release). After this, it is not clear what may come next, the options being:
    • Clearing the current backlog of project viewers.
    • Further viewer-side performance improvement work.
    • Additional maintenance viewers.
    • Other work still in early planning.
  • Further materials / Bakes on Mesh (BoM) Discussion:
    • Materials support for Bakes on Mesh is commonly requested, but there are several impediments to this (e.g. the Bake Service would require significant update just to be aware of materials; there needs to be a means to define how materials should be ordered during compositing, how alpha channels are properly managed, etc.).
    • It was asked by LL if things might be improved with just the introduction of a new wearables type, capable of allowing a single materials map to be worn per outfit / look.
    • Cathy Foil has also demonstrated a possible approach – although this also requires some significant updates to SL, as well as work being carried out externally to to the platform by content creators – see the video below (originally produced as a demonstration for the Lab).

    • Before committing to considering any materials / BoM work, LL would like to see a properly scoped design documents explaining what is felt would be required (including supporting protocols, etc.), and how it might work.
  • BUG-225519 “Mesh Uploader] Add option for automatic convex hull physics shape”.
    • This was a subject of discussion at the previous CCUG meeting, the request calling the provision of simpler physics shapes to be available for use when uploading a mesh than are currently available – the simplest being a “cube” mesh physics asset. This is something Firestorm already provides:
Physics models offer through the Firestorm mesh uploader – the shapes being continued within the viewer for application. Credit: Beq Janus
    • The question was raised as to what to do when uploaded multiple mesh objects, and the physics shapes don’t match the expected number (so four when uploading 5 objects, for example). The consensus at the meeting appeared to be to use whatever is defined as the default physics shape within the file itself.

From the TPVD Meeting

  • [Video: 2:17-5:44] The Lab is considering moving the time of the TPVD meeting and adjusting the frequency so as to avoid running back-to-back (so to speak) with the Content Creation meetings, which inevitably leads to a lot of repetition between two meetings held less than 24 hours apart.
    • The straw poll of attendees pointed towards the meeting having a later start time than the current 12:00 noon. Exact time TBC.
    • There will be a move to try to have TPVD meetings on alternate weeks to the CCUG meeting.
  • [Video 6:10-7:23] During the log-in process, a series of flags are set on logging-in to SL, including one called “Gendered”. This apparently meant something in the past, but since around the time of the introduction of Viewer 2.0 (2010), it has effectively been ignored. LL are therefore looking to possibly pull the code relating to it, but wanted to make sure there are no TPVs using it for some reason before doing so.
  • [Video 13:54-17:14] The question was floated on the animation poser code contributed several years ago by NiranV Dean from his Niran’s Viewer, and whether it would be appropriate for TPVs to implement it if LL is not going to.
    • The Lab’s view is that the code does not support the “shared experience”, in that poses are only seen by the user setting them, nothing is sent to the simulator for over viewer to see. This requires additional code to overcome.
    • Currently, LL is planning some other work “related to avatar posing the movement”, and it is possible the poser code might get folded into that work.
    • While, in principle, there are no objections to other TPVs implementing the code, they would have to do so on the basis that the code only allows the user’s own avatar to be posed, and not extended to posing other avatars (which would not be seen by the users of those avatars).
  • [Video 17:28-32:00] There have been some recent overlaps / crossed lines in aspects of viewer work between Linden Lab and TPV. As a result the question was raised by the Lab as to what could be done to improve communications between TPV and LL and vice-versa to avoid future misunderstandings.
    • One suggestion was to make the TPVD meetings more of a two-way discussion in terms of what both the Lab and TPVs are working on, etc., particularly if appropriate action points could be produced when required.
    • Another suggestion was to have the Lab create a secure sandbox environment in which they could gain greater familiarity with TPVs and their capabilities as a part of their own work time (policy dictates – with good reason – LL employees are only allowed to use TPVs on systems and accounts that have no direct association with the Lab).
    • An alternative to the above that was offered would be for LL staff to peek into the support groups, etc., run by TPVs to get an understanding as to what users are asking for, and what is being responded to.