SL project updates week 20/2: Content Creation User Group w/audio

The Content Creation User Group meeting, at the Hippotropolis Camp Fire Circle (stock)

The following notes are taken from the Content Creation User Group meeting, held on  Thursday, May 18th, 2017 at 1:00pm SLT at the the Hippotropolis Camp Fire Circle. The meeting is chaired by Vir Linden, and agenda notes, etc, are available on the Content Creation User Group wiki page.

Audio extracts are provided within the text, covering the core points of the meeting. Please note, however, that comments are not necessarily presented in the chronological order in which they were discussed in the meeting. Instead, I have tried to place a number of related comments by Vir on specific topics into single audio extracts and with their associated notes, in the hope of making those topics easier to follow, and without changing the context of the comments themselves.  If you would prefer to listen to the discussion and comments in the order the meeting unfolded, I have embedded a video recorded at the meeting by Medhue Simoni. My thanks to him making it available.

Supplemental Animations

While this is now an adopted project, the focus has been on animated objects, and so there is no significant progress on this work at present.

Applying Baked Textures to Mesh Avatars

No movement on this.

Animated Objects

Vir has spent most of the week since the last meeting working on animated objects and developing prototypes and looking at proof-of-concept to see how objects might be animated using the avatar skeleton. He describes the results thus far as encouraging whilst also pointing out it is still early days with the work, so it is still far too early to determine what the final architecture will be.

The viewer already has a notion of an avatar without a human operator, which is notably seen when uploading an avatar mesh or animation. This notional avatar isn’t rendered graphically, but is oriented using transforms so that an object can use it as a source of joint motions. This is not necessarily how things will work with any finished product, but it is enough to demonstrate what might be possible.

Currently, Vir is working with single object rigged meshes, and would be happy to receive similar models, preferably with associated animation, if people have anything they believe would be useful for helping with these tests.

It is hoped that “being animated” will be an additional property which does not require a new mesh upload option, so that any rigged mesh for which you have Edit permissions for can be set to use the property  so that it can be driven by its own animations.  Currently:

  • This will likely mean the object will no longer be attachable to an avatar
  • It has yet to be determined if this property will be a new prim type or an additional field added to an existing object, etc
  • It will not require any changes to the current mesh uploader; the property to convert a mesh to an animated object can be set post upload.

A suggestion was made that the animated mesh should use its own skeleton when independently rezzed in-world, but a sub-set of a controlling avatar’s skeleton if it is attached. This would allow things like animated horses to be rezzed in-world and then sat on for riding or pets to be “picked up” and carried,  as is currently the case with some scripted animals already.

The testing carried out thus far hasn’t looked at animated attachments, although Vir appreciates the potential in having them. However, there are concerns over potential additional performance impacts, the risk of bone conflicts (what happens if your avatar is already using one or more bones some something and these same bones are used by an animated attachment).

While not ruling the potential out, Vir’s tests so far haven’t encompassed animated attachments to determine what issue might arise.  There are also other factors involved in avatar control which need to be looked at with animated objects: hover height, offsets, position, etc., all of which might affect how an animated object might be seen / behave.

Scripting / LSL Commands

The current work has not so far looked at LSL commands or command sets for the new capability. However the intent remains that scripts for controlling an animated object will be held within the inventory for that object, and able to call animations for the object also contained within the object’s inventory, so things are not straying too far from what can already be doing vis scripted control of in-world objects.

Performance Impact

Similarly, it is hard at this point to know what the likely performance hit might be. Bento has shown that adding more bones to the avatar skeleton doesn’t create a notable performance hit, so providing a skeleton for in-world objects shouldn’t cause any greater impact than a basic avatar. However, associating a rigged mesh object with than skeleton, then animating the joints, etc., will have an impact, particularly if a lot of animated objects are used in any given place.

This is something that will be looked at in greater detail once there is a project viewer available for testing alongside any server-side updates, although the Lab doesn’t intend to make it easy for a region to be spammed with multiple versions of an animated object, and this may in part be linked to the Land Impact associated with such objects.

Attachment Points on Animated Objects and Linksets with Animated Objects

While attachment points are also joints within the skeleton being used by an animated object, and so can be animated, they would not actually support having other objects attached to them, as the animated object doesn’t have links to other objects in the way an avatar does.

An animated objects could be a linkset of rigged meshes which are identified as a single object, with all of the rigged meshes referencing the same skeleton. Things might be more difficult if static mesh objects form a part of the object, as it is not clear how the positioning of these would be controlled, and more testing is required along these lines.

Body Shapes and Animation Scaling

Requests were made to allow animated objects to have body shapes (which would allow slider support, etc.), and  / or animation scaling.

Because of the changes that would be involved in both, coupled with the potential for conflicts in the case of animation scaling, Vir does not see either as being part of this work – as previously noted, assigning a body shape to an animated object would impact a number of other back-end systems (such as the baking service), adding significant overheads to the project.

As such, the Lab would rather keep the work focused, building on something that could be rolled-out relatively quickly, and then iterated upon. However, one option that might be considered is having some kind of root node scale, based on the scale of the animated object that would size the skeleton to the scale of the object, rather than vice versa, possibly by altering how the mPelvis bone is managed for such objects.

[56:37-1:02:30] The final part of the meeting delved into the relative efficiency of mesh and sculpts, and matrix maths on CPUs / GPUs, and the complexities of rendering animated objects, together with a reminder that object rendering costs are currently being re-examined.

Other Items

In-World Mesh Editing?

[41:00-55:55] Maxwell Graf raises the idea of having a simple in-world mesh editor / enhancements to the editing tools which would allow creators to adjust individual face, edge or point in an object, presenting a reason for mesh creators to spend more time in-world and which might allow non-mesh builders more flexibility in what they can do as well.

The current toolset  – mesh uploader and editing tools – would not support such a move. There are also a number of potential gotchas on a technical level which would need to be understood and dealt with, and in order for the Lab to consider such a project, any proposal would have to consider the smallest subset of capabilities available in dedicated mesh creation / editing tools like Blender and Maya that would be useful to have in-world, so that it might be possible to define the overall scope of the work required in terms of resources, etc., and what the overall return might be on the effort taken.

Based on the conversation, Max is going to try to put together a feature request / proposal, even if only for the purposes of future discussion.

 

Black and White Women in Second Life

Nitroglobus Roof Gallery: Black and White Women

Now open at Nitroglobus Roof Gallery, curated by Dido Haas, is Black and White Women, and exhibition of photography by Christower Dae.

“Chris likes to explore, experiment, is curious and loves making pictures. Photography for Chris is immortalizing avatars in ambiguous attitudes,” Dido states in the liner notes for the exhibition. “His dedication to the avatar portraits, to the capture of those expressions that a skin can offer by giving (according to many people) a soul to the avatar and its personality begins.”

Nitroglobus Roof Gallery: Black and White Women

The result is a series of stunning avatar portraits presented in black and white, focusing on the female face. Presented in the familiar large format for Nitroglobus. However, these are no ordinary portraits. Each offers a considered, unique moment in time captured in the life of each subject; that all are presented in black and white services to heighten the beauty within it.

Each of the images is perfectly framed to offer a story; what that story might be is left entirely up to us: there are no visual clues within the pictures themselves; those which do offer any background do so in soft focus, ensuring attention remains on the face before us. Shown in close up, every detail of each face is presented to us: the brush of freckles across a cheek, the reflection of light within an eye, the spread of eyelashes, the fullness of lip – all are beautifully captured and rendered.

Nitroglobus Roof Gallery: Black and White Women

I’ve seen many images of avatars in Second Life, both through exhibitions and via Flickr, but Black and White Women is one of the more remarkable sets of such studies I’ve seen. The natural cast to each is – to repeat myself – genuinely unique. This is an eye-catching exhibition, one I recommend visiting.

Nitroglobus Roof Gallery: Black and White Women

SLurl Details

Second Life Maintenance RC viewer: parcel access, trash, and more

Update, May 23rd: version 5.0.5.326444 of this viewer is now the release version of the official viewer.

On Friday, May 12th, 2017, Linden Lab issued a new Maintenance release candidate viewer – now version – 5.0.5.326444 – featuring a number of bug fixes and improvements.

In particular the viewer includes updates to reflect the revised region / parcel access controls now deployed to the main grid. It also includes improvements to inventory management and purging Trash, and a range of other improvements and updates as well as numerous bug fixes.

As per usual, this is not intended to be an in-depth review of the viewer, but rather to highlight some of the new / updated features and an overview based on the release notes.

Region / Parcel Access Controls

The new region / parcel access controls are paired with a server-side update first announced in April, and the first part of which was deployed to the LeTigre server RC  channel on Wednesday, May 17th. Until these server-side updates are deployed grid-wide, this particular set of changes in the view may not function on all regions.

In short, the new controls mean that when a region holder / manager explicitly set a region for open access by visitors (via the Region / Estate floater), parcel holders on the region will no longer be able to override the setting at the parcel level and create ban lines around their parcel. They will, however, still be able to use their parcel ban list or deploy security orbs or similar (assuming the use of the latter is allowed under any covering covenant).

This means that with this viewer, both the Estate tab in the Region / Estate floater has been updated, and the behaviour of the Access tab in the About Land floater has changed.

In the case of the Estate tab in the Region / Estate floater, the check box Allow Public Access has been removed, and a new option, Parcel Owners Can Be More Restrictive, has been added (see below).

With the new parcel access overrides, the old setting to Allow Public Access (top) has been replaced by a new setting, Parcel Owners Can Be More Restrictive (bottom), as found in the current Maintenance RC viewer

By default, Parcel Owners Can Be More Restrictive is checked, which means that as the updated settings are deployed server-side, parcel owners should see no difference in behaviour for their parcels unless an estate holder / manager opts to make changes at the estate level (as shown in the image above).

Should the option be unchecked, the estate holder / manager making the change will receive a model warning that they are about to make a change that could affect parcel settings in the estate.

The new modal warning estate holder / managers will see when changing the new access settings

Should they go ahead and APPLY  the change, two further things will happen:

  • Parcel owners will receive a new system notification for every parcel in the region they hold which has been affected by the change (below).
The new system notification displayed to parcel holders for every parcel in the region they hold which has been affected by a change to the region’s access settings at Estate level
  • Any previously active banlines around affected parcel will be removed, and parcel owners will no longer be able to set parcel access restrictions via About Land > Access, as the options to do so will be greyed out (as shown below).
    When the Parcel Owners Can Be More Restrictive option is checked, the parcel-level access options in the About Land floater will be greyed out for parcel holders, preventing them from overriding the region-level access

    If a region which previously allowed parcel holders to set their own access restrictions is set to public access (by unchecking Parcel Owners Can Be More Restrictive and clicking APPLY), and then is reverted again (by checking Parcel Owners Can Be More Restrictive and clicking APPLY), all parcels on the region will revert to the access settings applied to them before any changes to region access were made at the estate level.

    Continue reading “Second Life Maintenance RC viewer: parcel access, trash, and more” →

    Second Life – Ozimals closes

    Ozimals donated a limited edition bunny and Puffling to help raise funds during Filling the Cauldron, to help Second Life creator Elicio Ember and his family

    Update, May 18th, 2017: As per the  comment below from Neobokrug Elytis, further information pertaining to the situation has been published via Google Docs here: https://drive.google.com/file/d/0B-_7k-VigxufaTM5b18yVXpvZU0/view, offering additional information on the situation from the claimant’s perspectives.

    Update, May 17th: As per the comment below from Sue W, the Ozimal blog, including the post referred to in this article, has been cleared down.

    Sonya Marmurek indirectly brought this to my attention via an image posted to her Flickr stream: Ozimals, the brand of breedable rabbits and Pufflings is closing its doors with immediate effect.

    The cause is apparently a Cease and Desist letter forwarded to Ozimals founder Malkavyn Eldritch. No specific details of the cause of the letter have been made available. However, Malkavyn broke the news in an Ozimals blog post on Tuesday, May 16th, 2017, which reads in part:

    At 8:00 am on Monday, May 15, 2017, I received a Cease and Desist letter from legal counsel representing Edward Distelhurst and Akimeta Ltd. This letter demands that I cease all use of Ozimals intellectual property.

    I don’t personally agree with this claim, but I do not have the means to fight this in court, therefore I have no choice but to comply.

    As of the morning of Wednesday, May 17, 2017, my products and their associated games will cease to function.

    This means:

    All databases supporting the bunnies and Pufflings will be off-line.

    Support, both in-world and through the ticket portal, will cease.

    All Ozimals in-world groups will be closed.

    Pufflings will cease to function.

    Any bunny who is Everlasting will continue to function, as he or she does now: without cost.

    Any bunny who is not Everlasting will be unable to eat and will hibernate within 72 hours.

    This is not the first time Ozimals have faced a legal situation, having been involved in a lengthy dispute with Amaretto Horses which ran from late 2010 through 2013.

    Alongside her image, Sonya notes:

    If you read this before it’s too late, there’s free eternal timepieces and other goodies in the Ozimals main store to make sure you can keep your bunny pets with you even when the servers go down.

    Whatever the ups and downs or ins and outs of this situation, Ozimals have proven extremely popular across Second Life, and  Malkavyn closes his post with an apology and thanks to all those who have supported Ozimals over the years:

    It was never my intention for the time we’ve all spent with the bunnies and the Pufflings to end like this. I want to thank you from the bottom of my heart for all of the support this community has given me over the last seven years. I wish there was more I could say.

    SL project updates week 20/1: server, viewer

    Crystal Garden Estates, Quararibea Cordata Island; Inara Pey, May 2017, on Flickr Crystal Garden Estates – blog post

    Server Deployments

    As always, please refer to the server deployment thread for the latest updates and news.

    • There was no Main (SLS) channel deployment or restart on Tuesday, May 16th.
    • On Wednesday, May 17th, the three RC channels should be updated as follows:

    Simulator Operating System Update

    The build of the simulator code using an updated version of Linux was initially deployed to LeTigre in week #19. However, it was rolled back on Thursday, May 11th and replaced with the server maintenance package originally deployed to the Magnum RC channel that week. The reason for this can be found in BUG-100667, “Krafties HUD does not work on LeTigre regions only”. The BlueSteel deployment should hopefully correct this issue.

    SL Viewer

    The Alex Ivy 64-bit viewer was updated to version 5.1.0.505089 on May 11th. If you’re on a 64-bit version of Windows, make sure you click on the correct download link to avoid receiving the 32-bit version.

    On Friday, May 12th, the Maintenance RC viewer, version 5.0.5.326168 was released. This viewer includes improvements to Trash purging behaviour designed to assist with avoiding inventory losses and the new UI controls for the new parcel access overrides – both of which have been previously noted in these updates, with the latter being deployed to LeTigre this week.

    The new Trash purging warning, giving a count of the items about to be permanently deleted from the trash folder – one of the new behaviours in the Maintenance RC viewer designed to help combat accidental inventory loss through Trash deletions

    In addition, the Maintenance viewer has additional fixes and UI improvements, including a contributed feature which allows users to search and replace asset links in their inventory. This should greatly simplify updating links related to a product when it has itself been updated. The default media playback volume has also been reduced, in keeping with recent requests from some Community Gateways.

    Outside of these two viewers, there have thus far been no other changes to the viewers in the pipeline, which remain as:

    • Current Release version: 5.0.4.325124, dated April 3rd, promoted April 19th – overview
    • RC viewers:
      • Voice RC viewer, version 5.0.5.325998, re-released on Friday, May 5th
      • Project AssetHttp project viewer, version 5.0.5.325940 dated May 4th
    • Project viewers:
      • 360-degree snapshot viewer,version 4.1.3.321712, dated November 23rd, 2016
    • Obsolete platform viewer version 3.7.28.300847 dated May 8, 2015 – provided for users on Windows XP and OS X versions below 10.7.

    Terrain Issues

    The golfing community has noticed an apparent behaviour change affecting wither the terrain or scripted golfing systems. The change manifests in a number of ways, for example: indicators which should only be triggered when a ball registers as being in Linden Water triggering when the ball is on land; golf balls apparently penetrating the terrain and being marked as deep under it; balls hitting prim objects and bouncing wildly, etc.

    The problem has been noted a multiple golf course and appears to affect all popular golf systems – those by Fa Nyak or Cowley, for example. The issues have been around for about 5-6 weeks, and reports are that they are getting worse. They don’t appear to be linked to issues of “lag” either in the viewer or at the simulator end (e.g. due to the volume of avatars in a region), as the problems can pop-up with just two people playing a round; they are also somewhat inconsistent and difficult to deliberately reproduce. A JIRA has been requested on the problem to help the Lab investigate.

    A new home for Artful Expressions in Second Life

    Artful Expression: Sorcha Tyles

    Artful Expressions, the boutique gallery curated by Sorcha Tyles, is well into its May exhibition, and now has a new, expanded home.

    Newly relocated on a sky platform 1000 metres above ground, the gallery now occupies two L-shaped buildings built around a central square which can be used for opening events. The buildings provide a greater amount of space for the monthly exhibitions as well as for Sorcha’s own art, whilst retaining much of the homely feel of the original, ground-level gallery space.

    Artful Expressions: Magic Marker

    With the move comes an expansion in the number of artists exhibited each month. While Sorcha will continue to invite two artists  / photographers to display a number of their works at the gallery each month, she now additionally runs a contest via Flickr, inviting those interested in exhibiting their work to post an image to her Flickr group.

    Each month, a picture will be selected by Sorcha and two of her friends – Hayael Bracula and Ninna Dazy – from those submitted, and the artist / photographer will be invited to display some of their work at an upcoming exhibition at Artful Expressions.

    Artful Expressions: Hillany Scofield

    For May the invited artists are Hillany Scofield and I’m a Magic Marker (SquarePegRoundHole69) – or Magic Marker for short. Hillany really needs no introduction to the world of SL art, being an accomplished photographer and artist who has exhibited widely in-world, and who also has her own gallery space (see me most recent review here). Magic Marker is more of a – to me at least – new name in the art world, and she offers a disarmingly sweet set of biographical notes:

    For me, Second Life is a way to escape into a novel that you write yourself, but with me, the story is generally without a plot. Some images are cathartic, some are just because I like to look at pretty things. 🙂  I hope you like them too. And thank you for visiting. ❤  

    Artful Expressions: Magic Marker

    Her work is an interesting mix of avatar studies, the quirky and the eye-catching, often featuring bold colours which demand our attention.

    The selected entry from the April competition is another well-established and widely known artist in Second Life: Goodcross, whom we had the pleasure of seeing exhibit at Holly Kai Park in 2016. Each artists presents a total of nine images for the exhibition, which for this month are all avatar studies / portraits, with each display area clearly noticed and biographical information on the artists readily available. Sorcha’s own work is offered in the foyer area of one of the buildings where coffee and a guest book are on offer, while a cosy hang-out area can also be found in another wing of the gallery.

    Artful Expressions: Goodcross

    The current exhibition will run through until the end of May 2017.

    SLurl Details