Month: April 2023

Fantasy Faire 2023: your (almost) complete guide

Posted on by Inara Pey
Fantasy Faire 2023: The Fairechylde at Sipala
If you are just after links and Surls, click here to jump to them!

The largest fantasy-related event to take place in Second Life, Fantasy Faire 2023, opened its gates to Fairelanders at 12:00 SLT on Thursday, April 20th, 2023. It will remain open through until Sunday May 7th, 2023 inclusive, once again raising money for Relay for Life and the American Cancer Society’s (ACS) efforts to bring about a World Without Cancer.

 Table of Contents

As with previous years, 2023 will see a wide range of activities and events taking place at the Faire through until Sunday, April 30th, with role-play, parties, Jail & Bail, the LitFest, live performances, auctions, and more. After this, the regions will remain open for people to visit and enjoy sans on-going activities, allowing them to shop at their leisure and explore the regions in relative peace – although some activities such as the Fairelands Quest will also continue through the final week as well.

Fantasy Faire 2023: Safe Haven

The notes below are intended to get Fairelanders old and new up-to-speed with a one-page look at the event as it opens.

If You Are New to the Faire and Other Notes

If you are new to Fantasy Faire, the many regions it encompasses can be overwhelming to the point where you might fill panicked into trying to see everything at once.. But – the Fire is here for two weeks, so you have lots of time to visit, and remember: shopping and sightseeing can be much easier once all the initial rush is over!

The best place to start a first-time visit is Fairelands Junction. From here you can reach all of the regions via the teleport portals, so it makes a good hub for exploring. You can also grab a Fantasy Faire teleport HUD from here (or at the region landing points).

You might also want to take the following suggestions:

  • Keep up-to-date with the Faire and all that is going on through the official Fantasy Faire website.
  • The Fairelands have their own mythology and history. If fantasy is your thing, be sure to read about the History of the Fairelands.
  • For the best visual experience:
    • Make sure you have Advanced Light Model (ALM) enabled in your viewer (Preferences → Graphics) – this shouldn’t hit performance too heavily on most reasonable systems (you do not have to enable Shadows).
    • Make sure your viewer is set to Use Shared Environment (World → Environment) as the regions all have their own environment settings, and several have dedicated day / night cycles.
  • Regions can be busy! So:
    • If you teleport into one, be sure to move a little way from the landing point as soon as you can to avoid becoming part of an avatar tower!
    • Don’t over-dress with lots of bits and bobs and attachments to avoid adding to the rendering lag everyone has to experience.
Fantasy Faire 2023: Sambeaubee

Shopping

Fantasy Faire is very much about shopping. Merchants from across SL can be found in the shopping regions, all of whom offer some of their items through official RFL of SL vendors, so that proceeds of sales go to RFL / ACS.

Parties, Entertainment and Performances

The Fairechylde: DJ Events

The Fairechylde will once again be docked at the Faire, spending her time within the region Sipala and hosting DJ parties to keep Fairelanders entertained. These parties – live or via Fantasy Faire Radio – will be running right throughout the Faire, and further details can be found at:

Fantasy Faire 2023: The Shimmering Fen

Live Performances

Every Friday through Monday throughout the run of the Faire will be live performances by musicians, singers, dance troupes and more from across Second Life. Performances will be hosted on the Arts and Performance regions of Giraphoria and Sambeaubee, and all participating performers, acts and troupes can be found at the Live Performance Schedule.

The Fairelands Masked Ball

Fancy a more formal soiree where tuxedoes and gowns are encouraged and an air of mystery is added with eyes behind masks? Then head for the Fantasy Faire Masked Ball, with two dates to suit time zones:

  • Saturday, April 29th – Noon through 14:00 SLT.
  • Friday, May 5th – 18:00 through 20:00 SLT.

The Ball will take place within the Sambeaubee Arts and Performances region.

Fantasy Faire 2023: Fungalmire

Events and Activities Highlights

Literature and Film Festivals 2023

The Literature Festival (LitFest) will this year be based at the Stump Theatre in Fungalmire, and will again offer a range of activities including tours of the Faireland regions and opportunities to write about them, together with poetry readings, open microphone readings and the LitFest theme day.

This year, our theme is anthropomorphic fiction – in other words, fiction where animals (often displaying decidedly human traits) form an important part of the narrative. This can range from Aesop’s Fables or Beowulf,  to oriental legends, to well-known children’s books such as The Wind in the Willows, Winnie the Pooh and Charlotte’ Web, to the medieval tales of Reynard the Fox or the the trickster tortoise and the hare in West African tales. The Guest of Honour for 2023 is Anne Louise Avery, author of Reynard the Fox, the beautiful novel that draws upon medieval sources.

Returning for its third year at Fantasy Faire, the Film Festival features a special machinima focused event almost every day of the Faire from April 24th, at 11:00 SLT. These will include talks, discussions and retrospectives. There will also be three film premieres during the Film Festival, and the Film Festival Competition, and a chance to win a Golden Waffle.

Details of LitFest and Film Festival can be found via these links, and I’ll be previewing both shortly in these pages.

  • The full LitFest Calendar – provides a run-down of activities.
  • Region tours schedule – region tours are held on most days of the Faire at 13:00 and / or 17:00 SLT, offering the chance to explore the Fairelands and seeking the stories they have to tell as well as their special secret places and details.
  • Film Festival page.

Role-Play Events and Activities

The Children of Stories will once again be offering a rolling role-play event during the Faire. This year the focus is on the The Gathered. Based within Flambois as they play out and explore a special storyline tied to the Fairelands.

Flambois is a school dedicated to the Fairelands itself, and has taught many illustrious alumni, but why then did these lanterns summon them to this realm if everything was alright? Strangers to this land, they will have to discover this realms stories and watch for unknown dangers and suspicious characters who may be Shadows of the Unweaver.

– from The Children of Stories

Find out more via these links:

In addition there will be a range of role-play classes for all who are new to role-play in Second Life – fined out more on the Fantasy Faire Role-Play Classes page.

Fantasy Faire Quest: The Magic of Dragons

This year’s chapter of the Fantasy Faire adventure quest series is The The Magic of Dragons. Once again the Bard Queen will call upon adventurers bold of heart to purchaser a Quest HUD (also proceeds to RFL / ACS) and follow the clues in a quest of two parts. The first opens on Monday, April 24th, and will take adventurers across the Faireland regions in search of answers. In part 2, opening on Thursday, April 27th, adventurers will be able to enter the Quest region and resolve the mystery – and receive their bounty from the Bard Queen!

Fantasy Faire 2023: Nova Nadiya

You don’t have to join the Quest right from the start; prizes are for everyone who completes the adventure, and the Quest will be open right through until May 8th.

Many years ago, a realm called Nadiya was invaded by the forces of the Unweaver. Its residents defended their land so well, they drove the enemy to retreat. But sadly, their land was so damaged by the attack that it could no longer support them. They, too, were forced to leave their beloved home.

– from the introduction to the Fairelands Quest, 2023

Find out more via the Fantasy Faire Quest page.

And There’s More

Don’t forget, all the staples of Fantasy Faire will again be available, including the live auction, the silent auction and jail and bail – see the Fantasy Faire website for details on these.

So, why not dress for the occasion (or buy a Quest Deluxe HUD and dress in the outfit supplied with it!) and head on over to the Fairelands to discover what adventures and parties await?!

What’s it all About: The Beacon Initiative

In February, 2022, the American Cancer Society (ACS) began a new chapter in its global work in the care and support of those diagnosed with cancer in all its forms, with the launch of the BEACON (Building Expertise, Advocacy, and Capacity for Oncology Navigation) Initiative. In partnership with health care facilities and cancer organisations around the world, the BEACON Initiative improves support and access to care for people living with cancer in low-and-middle-income countries (LMICs). It supports health facilities and cancer organizations in LMICs to design, implement, and sustain their own oncology patient navigation programmes.  This is accomplished through the development of materials – called the Toolkit – and a peer-learning collaborative, both of which are provided in an online format for ease of access and adaptability.

Currently BEACON is engaged in a pilot programme which encompasses ten healthcare facilities and cancer organisations across eight nations: Armenia, Brazil, Egypt, Guatemala, Indonesia, Malaysia, Nigeria, and South Africa, with some 22 countries expressing interest in the Initiative at its launch.

The ACS BEACON Initiative Pilot Programme (via ACS / Fantasy Faire)

Fantasy Faire has, through its work in supporting the development and operation of the Kenyatta National Hospital Hope Hostel in Kenya, has become a key player in the the development of the BEACON Toolkit, funds from the event being put into the production of two key elements within the kit: a patient and caregiver booklet and a health worker flipchart. While these materials cannot cure cancer, they will ease patients’ stress, helping them to better understand what is happening to them during their treatment, and help them to make the best choices for themselves and their loved ones .

Fantasy Faire is one of the cornerstones of our vital work. It’s an inspiring example of a global community working together to address a global challenge.

– Kristie McComb, ACS Managing Director of Global Capacity Development and Patient Support

Links and Region SLurls

Website Links Event Region SLurls Shopping Region SLurls
Website Home Page

Social Media

Exploring Nederlanse Bergee in Second Life

Posted on by Inara Pey
Nederlanse Bergee, April 2023 – click any image for full size

Held by Aloriana Shadowstar (Aloriana77) and designed Marie Nova, Nederlanse Bergee is a Homestead region currently open to the public and offering, in the words of the About Land description:

A beautiful island, ideal to get away from everything. A place to explore, to discover, to enjoy, to relax.

The region sits as three islands – two relatively large, and the third much smaller. Of the two larger islands, one forms a ribbon running from the south-west corner of the region and around to the north, separated from the second by a narrow channel which broadens into a bay as it and the ribbon island run north and then east. The third, small, island sits to the north-east.

Nederlanse Bergee, April 2023

The ribbon island is home to the region’s landing point. Ruggedly wild, the island offers a mix of temperate and tropical trees, little beaches, and cosy retreats. The latter range from a beachfront coffee house, passing by way of a little retreat and a small café to a parade of coastal shops tucked behind the island’s high northern peaks.

Somewhat incongruously, this island includes a small tram station. Quite where the trams used to run to / from is unclear; however, none seem to have been running for a good while, and the one that is present at the station has long since been converted into a little diner.

Nederlanse Bergee, April 2023

The channel between the two main islands is spanned at a single point by a wood and rope bridge, well towards its southern end. Footpaths on the far side of the bridge in turn lead to a gazebo sitting on a small promontory in the south-east corner of the region or to a second  little parade of shops which have, perhaps, more of a European lean to them compared to those in the north, which have a holiday island feel to them.

Dominated by a large flat-topped hill, this second island is also home to numerous places where visitors might spend time. These range from an outdoor gathering place that looks like it might be the home of the poetry reading events periodically held in the region (at the time of writing, the next is scheduled for April 28th), through to a coastal holiday home, the aforementioned gazebo and, within the northern bay, a little wharf against which a little boat with Bimini raised sits.

Nederlanse Bergee, April 2023

The smallest of the island might be tucked in close to the ribbon island, but, save for flying, appears to be the hardest to reach; none of the boats scattered around the region appear to be available for use by visitors, and the channels separating the little island from the others are deep. However, it offers a quite retreat in and of itself, with a summer house, wild flowers and a hammock under the shade of trees.

When seen under its default environment settings, Nederlanse Bergee has some of a painting’s look and feel about it; something that increases the Dutch tone evoked by the region’s name. However, the setting also lends itself to a wide range of EEP setting for those who are so inclined to experiment; for once, I stayed with the local EEP for the photos here.

Nederlanse Bergee, April 2023

Restful, a touch romantic and very photogenic, Nederlanse Bergee makes for a gentle, easy-going visit. My thanks to Shawn Shakespeare for the pointer!

SLurl Details

2023 SL SUG meetings week #16 summary

Posted on by Inara Pey
Burrow Wood County, February 2023 – blog post† 

The following notes were taken from the Tuesday,  April 18th Simulator User Group (SUG) meeting. They form a summary of the items discussed and is not intended to be a full transcript. A video of the entire meeting is embedded at the end of the article for those wishing to review the meeting in full – my thanks to Pantera for recording it.

Server Deployments

  • On Tuesday, April 18th, the SLS Main channel servers were updated with simulator release 579248, previously deployed to the RC channels. This means the doubling of linkset data memory (to 128KB) and the three LSL functions for strided list management – llList2ListSlice(), llSortListStrided(), and llListFindListStrided() – are now grid-wide.
  • On Wednesday, April 19th, simhosts on the RC channels will be restarted, but there will not be any new deployments to them.

Upcoming Simulator Releases

  • It is still hoped to get the server-side support for PBR materials to at least one RC channel – Preflight, with the potential it might also go to Snack as well – but there was no ETA on this at the time of the meeting. Currently, it remains with LL’s QA team.

Viewer Updates

No official viewer updates at the start of the week, leaving the pipelines as:

  • Release viewer: Maintenance R viewer, version 6.6.10.579060, dated March 28, promoted March 30th.
  • Release channel cohorts (please see my notes on manually installing RC viewer versions if you wish to install any release candidate(s) yourself).
    • Maintenance T RC viewer, version 6.6.11.579154, April 6th.
    • Performance Floater / Auto FPS RC viewer updated to version 6.6.11.579238, April 4th.
    • Maintenance S RC viewer, version 6.6.11.579153, March 31st.
  • Project viewers:
    • PBR Materials project viewer, version 7.0.0.579401, April 10 – This viewer will only function on the following Aditi (beta grid) regions: Materials1; Materials Adult and Rumpus Room 1 through 4.
    • Puppetry project viewer, version 6.6.8.576972, December 8, 2022.

In Brief

  • llGetAgentInfo received a new flag – AGENT_AUTOMATED – in week #15, however, the simulator side has et to be released; it is currently in a maintenance simulator support which may go to QA for testing in week #17.
    • This raised concerns of whether or not llGetAgentInfo was the right place for this flag, and whether it could result in the dataserver being spammed with requests from people wanting to know if visitors to their land were avatars or scripted agents. However, as Rider Linden pointed out, the simulator already has information on scripted agent, so there is no requirement for the simulator to query the dataserver.
    • See the video for the broader discussion on when the flag for a scripted agent is propagated across the grid.
  • There was a general discussion on possible LSL enhancements. This included:
    • Possible improvements to notecard handling by LSL (e.g. searching notecards – e.g. BUG-4906 -, faster notecard reading, a safe means of sending back the contents of a notecard so a script doesn’t need to build a web page on the fly / read the entire contents of the notecard into memory).
    • HTTP response expansion.
  • Objects rezzing objects: it has been noted that if an object is set to rez other objects (e.g. say a “crate dispenser” which might be used as a visual enhancement to Get The Freight Out to simulate cargo loading), the rezzing tends to work perfectly when the rezzing object’s owner is present, but can experience issues when the owner is not present.
    • This tends to occur if rezzing within the land is restricted to Group membership, and object owner did not correctly set their active group prior to placing out the rezzing object.
    • As the owner’s group is checked when present, this allows the rezzer to work correctly, hence why the problem only surfaces when they are absent.
  • For all other discussions, please refer to the view below.

† The header images included in these summaries are not intended to represent anything discussed at the meetings; they are simply here to avoid a repeated image of a rooftop of people every week. They are taken from my list of region visits, with a link to the post for those interested.

A Minimal Gaze in Second Life

Posted on by Inara Pey
UASL – Melusina Parkin: A Minimal Gaze

Currently open at Galerie Principale within the United Arts of Second Life hub, is an exhibition of pieces by Melusina Parkin, showcasing her minimalist approach to telling stories through her photography.

A Minimal Gaze is not a retrospective in the strictest sense of the word, but it does contain some images that admirers of Melu’s work may well recognise. What it does present is a rich cross-section of Melu’s style, something which might be called “moments in solitude”, whereby she focus on aspects of scene within Second Life and presents a image with a single cynosure, drawing our attention to that focus alone.

UASL – Melusina Parkin: A Minimal Gaze

Thus, the focal point stands in solitude in terms of their in-world surroundings, the framing of the image, and its ability to hold our attention. However, at the same time, a much broader narrative canvas is presented by the background and what lies just outside the frame of the picture; things not seen, but which nevertheless whisper to our imaginations. This gives Melu’s work a sense of unique individuality: the familiar seen without broader context other than what is suggested by the mind’s eye.

It’s an approach that Melu has used throughout the majority of her more than 10 years of Second Life photography, and which I’ve never ceased to appreciate, both for the above expressiveness and for the way it causes us to look at Second Life itself in a new way, bringing this digital world to life in a most unique and singular manner, unmatched by more “traditional” forms of photography (very much including my own) which provide broader, more contextualised views of the places visited and recorded within them.

UASL – Melusina Parkin: A Minimal Gaze

In the notes she provides for the exhibition, Melu notes that she is currently experimenting (like so many) with AI-generated images – but that also, she is not deserting this approach to her photography. It’s an assurance I appreciate, as a Second Life without her unique insight to its many faces and places would, frankly, be a diminished world.

Surl Details

2023 SL viewer release summaries week #15

Posted on by Inara Pey
Logos representative only and should not be seen as an endorsement / preference / recommendation

Updates from the week through to Sunday, April 16th, 2023

This summary is generally published every Monday, and is a list of SL viewer / client releases (official and TPV) made during the previous week. When reading it, please note:

  • It is based on my Current Viewer Releases Page, a list of all Second Life viewers and clients that are in popular use (and of which I am aware), and which are recognised as adhering to the TPV Policy. This page includes comprehensive links to download pages, blog notes, release notes, etc., as well as links to any / all reviews of specific viewers / clients made within this blog.
  • By its nature, this summary presented here will always be in arrears, please refer to the Current Viewer Release Page for more up-to-date information.
  • Note that for purposes of length, TPV test viewers, preview / beta viewers / nightly builds are generally not recorded in these summaries.

Official LL Viewers

  • Release viewer: Maintenance R viewer, version 6.6.10.579060, dated March 28, promoted March 30th – NO CHANGE.
  • Release channel cohorts (please see my notes on manually installing RC viewer versions if you wish to install any release candidate(s) yourself).
    • No updates.
  • Project viewers:
    • glTF / PBR Materials project viewer, version 7.0.0.579401, April 10 – This viewer will only function on the following Aditi (beta grid) regions: Materials1; Materials Adult and Rumpus Room 1 through 4.

LL Viewer Resources

Third-party Viewers

V6-style

  • No updates.

V1-style

Mobile / Other Clients

  • No updates.

Additional TPV Resources

Related Links

Space Sunday: a bit of JUICE, a flight test & celebrating 50

Posted on by Inara Pey
An artist’s impression of the European Space Agency’s JUpiter ICy moon Explorer (JUICE). Credit: ESA

What is widely regarded as one of the most important space missions yet undertaken has been successfully launched to much acclaim and excitement.

No, I’m not talking about the SpaceX Starship / Super Heavy orbital test flight – of which more anon – but that of the European Space Agency’s JUpiter ICy moons Explorer (JUICE) spacecraft, a 1.6 billion Euro (US $1.7 billion) mission designed to gain a more thorough understanding of Jupiter’s three major icy moons – Europa, Ganymede and Callisto.

JUICE started life in 2008 as part of a joint NASA/ESA mission which had the rather clunky name of Europa Jupiter System Mission – Laplace (EJSM-Laplace), a US $4.7 billion mission to study Jupiter’s moons with a focus on Europa, Ganymede and on Jupiter’s magnetosphere. The mission would have comprised at least two independent elements, NASA’s Jupiter Europa Orbiter (JEO) and ESA’s Jupiter Ganymede Orbiter (JGO), with the potential for involvement on the part of Japan and Russia.

By 2011, it was clear to ESA that NASA would not have the budget to fulfil its part of the mission by the 2020s, and the JGO element morphed into JUICE, which was selected for the agency’s first L-class mission in May 2012, with ESA being proven correct in regards to NASA’s involvement in EJSM-Laplace in 2015, when the US agency reformulated its plans into the Europa Clipper mission.

JUICE was launched on 14 April 2023 at 12:14:36 UTC on the penultimate flight of an Ariane 5. The launch has been delays by 24 hours due to weather concerns, but on the 14th, the launch vehicle lifted-off smoothly, the satellite successfully separating from the rocket’s upper stage some 26 minutes after launch prior to commencing an internal systems check, after which it was due to ‘phone home and say, “Hi there!”

This call came a little later than the mission plan had estimated at some 40 minutes after launch, but still within the overall expected time frame. Following confirmation from ground control, the 6-tonne space vehicle deployed its 27-metre spans of solar arrays, completing the task a little ahead of schedule, reporting the arrays to be fully deployed and active.

The deployment marks the start of a complex 8-year coast to Jupiter which includes four gravity-assists from the inner planets to both boost the spacecraft’s velocity and to help swing it onto the required trajectory required for a successful Jupiter rendezvous (and a possible fly-by of the asteroid 223 Rosa in October 2029). These flybys will comprise:

  • August 2024 – a return to Earth, using both the Moon and Earth to accelerate and adjust course. This will be the most accurate gravity assist manoeuvre ever carried out by an interplanetary vehicle.
  • August 2025 – a flyby of Venus whilst travelling around the Sun, again accelerating the spacecraft whilst angling it onto a trajectory that will see it swing by Earth
  • September 2026 a second flyby of Earth (confusingly called “Earth flyby I”, which will throw it out into the solar system almost as far as Mars before it swings back around the Sun.
  • January 2029 – a third flyby of Earth (“Earth flyby II”) which will slingshot JUICE on a two year journey to Jupiter, with the possible asteroid flyby along the way.
An animation of the Earth / Venus flybys JUICE will perform, and its flight to Jupiter. Credit: Phoenix7777

On arrival in the Jovian system, in July 2031, JUICE will first perform a flyby of Ganymede in preparation for Jupiter orbital insertion about 7.5 hours later. This will place the vehicle in an elongated orbit around the planet, allowing it to perform some 35 flybys of the target Moons. The orbit around the planet will gradually becoming more circular over time, and will have an inclination that will allow JUICE to also study Jupiter’s Polar Regions and its magnetosphere.

The flybys will allow JUICE to observe its targets over a 3.5 year span of time, with a major focus on Europa. However, in December 2034, the focus of the mission will shift as JUICE enters an extended, 5,000 km elliptical orbit around Ganymede. This will be rapidly circularised to 500 km in 2035, allowing the vehicle to carry out an in-depth study of Ganymede’s composition and magnetosphere.

It is anticipated that the vehicle’s fuel reserves will be depleted to a point where accurate guidance and manoeuvring cannot be maintained by the end of 2035, and the last remaining reserves will be used to impact the craft on Ganymede at the end of that year or possibly very early in 2036.

The Ariane 5 rocket carrying JUICE lifts-off from Europe’s Spaceport in Kourou, French Guiana, April 14th, 2023. Credit: JODY AMIET/AFP

The primary aim of the mission is to more fully characterise the overall surface and (particularly) sub-surface conditions on (notably) Europa and Ganymede, and also on Callisto. As regulars to this column (and to space exploration in general) will know, Europa is believed to have a surface crust of ice covering what could well be a deep liquid water ocean, heated and kept in a liquid (or near-liquid) state by the moon being constantly “flexed” by the gravitational influences of the other Galilean moons as they orbit Jupiter, and Jupiter itself.

With this in mind, JUICE will specifically study Europa to understand the formation of surface features and the composition of the non-water-ice material. In particular, it will attempt to gather information on any chemistry essential to life which may be present on Europa’s surface, including organic molecules, and it will carry out the first sub-surface soundings of the moon in order to try to determine the thickness of the icy crust over the most recently active regions of the moon, and attempt to gain a clearer understanding of what lay beneath it – such as liquid water or icy slush.

While further away from Jupiter and with a more one-side “pull” being exerted on them, it is believed that both Ganymede and Callisto might also have oceans of liquid water (or perhaps icy slush) under their surfaces, so the main science objects for these moons – with the particular emphasis on Ganymede comprise:

  • Characterisation of the ocean layers and detection of putative subsurface water reservoirs.
  • Topographical, geological and compositional mapping of the surface.
  • Study of the physical properties of the icy crusts.
  • Characterisation of the internal mass distribution, dynamics and evolution of the interiors.
  • Investigation of Ganymede’s tenuous atmosphere.
  • Study of Ganymede’s intrinsic magnetic field and its interactions with the Jovian magnetosphere.

In all, the information gathered on the three moons should help scientists better assess their potential as havens of basic life within any warm oceans which may exist within them.

I think this is something that Europe can be extremely proud of. This is a mission that is answering questions of science that are burning to all of us.

– Josef Aschbacher, ESA Director General

The launch was the sixth Ariane 5 flight to carry an ESA mission, a total that includes the December 2021 launch of NASA’s James Webb Space Telescope that features significant ESA contributions. It was the 116th Ariane 5 launch overall, dating back to 1996. However, it was also the last flagship mission launch for the ESA workhorse; after an upcoming launch of two communications satellites, for the French and German governments respectively, Ariane 5 will make way for its Ariane 6 successor, with the first launch of the new rocket – which has had a troubled development cycle – is due towards the end of 2023 or early 2024.

Continue reading “Space Sunday: a bit of JUICE, a flight test & celebrating 50” →