It’s time to highlight another week of storytelling in Voice by the staff and volunteers at the Seanchai Library – and this week previews the launch of a very special event.
As always, all times SLT, and events are held at the Library’s home in Nowhereville, unless otherwise indicated. Note that the schedule below may be subject to change during the week, please refer to the Seanchai Library website for the latest information through the week.
Monday, November 21st, 19:00: Reality Check
In a bizarre future, It takes place in a bizarre future, the technological singularity has occurred. The world have now become a place of biological fabricators, eight-legged cows, talking dogs, microscopic surveillance bots, and mid-life genetic upgrades for humans.
Life is not easy for many in a world where everyone is subject to police and government surveillance, and married couple Joe and Maddie are trying to make their way on their a small farmstead, trying to remain as unnoticed as possible.
But one morning, they are forced to drive off a “farm” a mix of machine, Ai and human, that has decided it is going to fly to Jupiter – and to do so, it intends to use an mix of enzymes and tree sap which, when combined, have a habit of wiping out all life in the area. To prevent this, Joe sets out devising the means to destroy the farm without the police becoming aware of his intent.
At the same time Maggie withdraws into herself, and Joe believes he may have to use a back-up and recreate her through the fabricator. However, he, the farm and Maddie are about to come together in the most unexpected of ways.
Gyro Muggin’s reads the 2003 short story by Charlie Stross.
Tuesday, November 22nd, 19:00: Tales from Life: Lesser Known Stories from History that Read like Fiction
Thursday, November 24th, 19:00: Alice’s Restaurant
A Seanchai Library Thanksgiving tradition with Shandon Loring.
As Thanksgiving arrives in the United States, Shandon Loring presents singer-songwriter Arlo Guthrie’s famous 1967 musical monologue, Alice’s Restaurant Massacree (also popularly known as Alice’s Restaurant, and the inspiration of the 1969 Arthur Penn film of that name, starring Guthrie himself).
Aside from the opening and closing chorus, the song is delivered as the spoken word accompanied by a ragtime guitar. The story is based on a true incident in Guthrie’s life when, in 1965, he (then 18) and a friend were arrested for illegally dumping garbage from Alice’s restaurant after discovering that the town dump was closed for the Thanksgiving holiday.
What follows is a complicated, ironic and amusing story told in a deadpan, satirical tone, which encompasses fines, blind judges, guide dogs, 27 8×10 copiously annotated glossy photos related to the littering, frustrated police officers, the Vietnam War draft and, ultimately, the inexplicable ways in which bureaucracy moves to foil itself, just when you’ve given up hope of foiling it yourself.
Don’t be late – the entire presentation is just 20 minutes in length!
Advanced Notice: The Dickens Project
The Dickens Project has officially announced an opening date of December 8th, 2022 and will run through until January 3rd, 2023. Old favourite guests and features will return along with an exciting new land configuration and new collaborators. Details to be published in due course!
Logos representative only and should not be seen as an endorsement / preference / recommendation
Updates from the week through to Sunday, November 20th, 2022
This summary is generally published every Monday, and is a list of SL viewer / client releases (official and TPV) made during the previous week. When reading it, please note:
It is based on my Current Viewer Releases Page, a list of all Second Life viewers and clients that are in popular use (and of which I am aware), and which are recognised as adhering to the TPV Policy. This page includes comprehensive links to download pages, blog notes, release notes, etc., as well as links to any / all reviews of specific viewers / clients made within this blog.
By its nature, this summary presented here will always be in arrears, please refer to the Current Viewer Release Page for more up-to-date information.
Note that for purposes of length, TPV test viewers, preview / beta viewers / nightly builds are generally not recorded in these summaries.
Official LL Viewers
Release viewer: version 6.6.7.576223 – MFA and TOS hotfix viewer – November 1 – No change.
Release channel cohorts::
Maintenance P (Preferences, Position and Paste) RC viewer updated to version 6.6.8.576431 on Monday, November 14.
Aoi-ike, November 2022 – click any image for full size
Jade Koltai has opened a new region design in the tradition of the work she started with the late (and still missed) Serene Footman. It offers a personal interpretation of Japan’s famous Blue Pond (青い池, Aoi-ike), located in the country’s second-largest island, Hokkaidō.
Occupying a homestead region, Aoi-ike presents the pond in the depths of winter, offering visitors a setting blanketed in snow to explore and plenty of opportunities for suitable time-of-year photographs. Pride of place is given to the pond itself, the waters the rich azure blue of the original, albeit caught beneath a cloud-laden sky.
Aoi-ike, November 2022 – click any image for full size
The physical world Blue Pond is entirely artificial, the result of work intended to protect the town of Biei following the December 1988 through March 1989 eruptions of Mount Tokachi. These caused a series of pyrrolastic events and associated mudflows which threatened the town, so following them, a series of dams were built to prevent future eruption-generated mudflows which might use the Biei River as a root through the locale.
In doing so, the dam trapped the water of the Shirahage waterfall, a series of falls passing over a cliff rich in aluminium to reach the river. This aluminium, coupled with volcanic sulphates in the water which whiten the rocks on the bed of the pond and so heightening their light-reflecting nature, gives the water of the pond its distinctive blue sky colour.
Aoi-ike, November 2022 – click any image for full size
This unlikely colour is not the only interesting feature of the lake; the plants present also participate in the surreal atmosphere of the place. While the pond is surrounded by living trees, in the middle there are skeletons of larch and birch that once grew on the ground before the formation of the pond. These trees are also present in Jade’s build, although the upriver falls are understandably absent.
Blended with a region surround that helps represent the surrounding mountains (the region around Biei is famous for a mountainous hiking trail that loops between Mount Tokachi and the (slightly) smaller Mount Biei as it sits between the Biei and Shintoku townships). While this loop is too big to recreate in a region, it is possible to circumnavigate the pond on foot along both trails and open ground – although if you have a wearable horse, the setting is also ideal for horse riding.
Aoi-ike, November 2022 – click any image for full size
The lightly wooden and most flat land is heavy in snow and light on structures – the latter comprising a Finnish-style suoja, a metal watchtower, a covered bridge, a little Japanese hut, and a flat-roofed cabin. Cosily furnished, the cabin offers the best respite from the snow and cold, the décor continuing the Japanese theme very nicely. The souja offers a small retreat with a comfy bed and the bridge includes a trio of theatre-like chairs warmed by a heater and where those using them can have a hot cup of tea.
Perhaps the most unusual feature in the setting is located on its northern edge, a short walk from the landing point. It takes the form of a large stone sculpture of a cat seated on a stone plinth and backed by a lower stone wall. It appears a little shrine-like in nature (if a big shrine!), and adds an interesting twist of character to the setting.
Aoi-ike, November 2022 – click any image for full size
Wildlife can be found scattered across the region – deer, owls, bear, cranes, weasels, and black swans – although some might need a little seeking out in order to spot. Also waiting to be found are further places to sit outside of those already mentioned: benches, deck chairs, and so on.
Easy to explore, reflective of the location that inspired it without being heavily tied it it, Aoi-ike presents an engaging winter setting for people to enjoy, entirely free from the more usual “seasonal” trappings generally found in winter-themed reasons at this time of year.
Aoi-ike, November 2022 – click any image for full size
Elven Falls Art Collective, November 2022: Chuck Clip
Chuck Clip has perhaps been most widely known as a tireless promoter and curator of art in Second Life through his Sinful Retreat regions, which have housed a stunning mix of personal art as well as exhibitions and a home for both 2D and 3D artists from across the platform and the world at large. However – and as I’ve noted in the past in these pages – he is himself an accomplished artist in the physical world and in Second Life (where he has also exhibited widely, if often quietly), working in a range of digital mediums, including prims, which he still sculpts today in preference to using mesh and external-to-SL tools like Blender.
I’ve long been attracted to Chuck’s work, particularly his 2D art, because of its powerful expressiveness, and his ability to take and mix a range of digital techniques to create pieces of art that are visually captivating and impactful whilst carrying messages of social conscience either directly or through more esoteric means using the surreal, the fantastic and the dark – elements which may be born in part out of his own life path – to offer insights into the human psyche, love, life, death, religion, and the (my term here) ambivalent nature of the human condition.
Elven Falls Art Collective, November 2022: Chuck Clip
I went to Rochester Institute of Technology initially for medical illustration. After set backs with mental illness, I returned to school, graduating from duCret School of Art for graphic design. Aside from a few small shows in local galleries, mostly I freelanced to make ends meet … My 2D work is created mostly digital using a variety of methods, from photography, to digital painting, to compositing, and more recently, using artificial intelligence to enhance and evolve these pieces into something entirely new.
– Chuck Clip
Many of these aspects of Chuck’s work can be seen and appreciated at Elven Falls Art Collective, owned and operated by operated by Ant (AntoineMambazo) and Aires Hax, where the main gallery is currently given over to an extensive exhibition of chuck’s art across its two floors and which opened on November 18th, 2022.
Elven Falls Art Collective, November 2022: Chuck Clip
Starting with the two pieces facing visitors as they enter the gallery’s foyer and progressing right throughout the seven halls (three on the lower floor, four on the upper, reached via the foyer elevator) this is a veritable tour de force of artistry at its finest. Each and every piece is layered both in terms of its physical composition and its meaning / interpretation. Some aspects of the pieces offer might disturb the sensitive; other might upset the deeply religious – but all will challenge and give pause for thought as to the statements each carries.
The narratives found within the offered works may be as direct as highlghting the role of formalised religion has often played fomenting war, death, and destruction (the entire upper rear hall of the gallery); or more subtle reflections on human nature – such as the mindset setting behind the avatars we encounter in Second Life (Behind the Avatar, within the lower floor, right-side hall) or the fact that as evolved as humanity might appear, we are as a race still prone to the drive of the primeval within us (Modern Man, within the lower floor right-hand hall).
Elven Falls Art Collective, November 2022: Chuck Clip
Each of the seven halls in the gallery also offers a 3D sculpture by Chuck. Each offers something of a reflection of the core themes to be found within the 2D art presented within it (perhaps most powerfully through Holy War, again to be found in the gallery’s upper rear hall); however, they also stand as a statement to artistic expression in Second Life, as Chuck also notes in his biography:
As a prim sculptor I’m largely self taught. I learned by trial and error and by going to places where the works of the old prim sculptors are still shown, examining them for hours on end just trying to figure out what they did to achieve certain effects. I am forever indebted to the old prim sculptors, for they paved the way for people like me. It is their legacy that I try to perpetuate as prim sculpture slowly but surely becomes a lost art in SL. Second Life has provided us with this wonderful medium, and it is my hope that one day it becomes recognized again for the greatness it can achieve.
Chuck Clip
Elven Falls Art Collective, November 2022: Chuck Clip
Bold, emotionally-charged, rich in narrative and marvellously enfolding digital and virtual artistry, Chuck Clip is a genuine maestro of digital art, and his exhibition at Elven Falls Art Collective stands as a powerful underscoring of this fact.
Le’eaf and Tinsel Café, Heterocera – November 2022
Exploring Second life – particularly the Mainland continents – can be thirsty work. Fortunately there are often spots along the way that people have provided for the enjoyment of refreshments and a little sit-down.
Coffee is often the beverage of choice (although with the northern hemisphere winter and the holiday season approaching, hot chocolate is liable to start rivalling it as an option!), and that’s just fine with me, as I’m a genuine coffeeholic / coffee snob in the physical world :).
Take Heterocera as an example. Like all of the mainland continents it has plenty to see, particularly along its road and rail network – although the former is generally the easier way to spot public places awaiting visitors. I’m not going to try to offer an extensive review of all the cafés across the continent in this piece, instead, I’ll cover a trio I’ve enjoyed dropping into on occasion.
Le’eaf and Tinsel Café, Heterocera – November 2022
The first comes on the north side of the continent and, given its latitude and the time of year, is appropriately dressed for winter. Snuggled against the southern side of Route 3’s north-eastern curve, Le’eaf and Tinsel is reached via a short climb up a set of stone steps from the side of the highway.
Snow crunches softly under your feet as you wander the white dusted trails. Among the trees and gently falling snow you will find a winter wonderland and of course… Coffee. Le’eaf&Bean Coffee truck is onsite for your caffeine and cocoa fix.
– Le’eaf and Tinsel About Land
The work of T Lefevre (Teagan Lefevre), this 2,800 sq metre parcel sits under her Le’eaf portfolio of parcel and regions designs. Like her other work, the parcel forms a part of the Mainland Preservation Society & The Nature Collective – with Teagan working with Emm Vintner (Emmalee Evergarden) – and there will be more on this in a moment.
Le’eaf and Tinsel Café, Heterocera – November 2022
Small the parcel might be, it nevertheless offers an engaging visit, the path from the step meandering to the left between rocks, trees and shrubs to reach a little wooden bridge. Following the path offers hints of more to be found beyond the hedges: the walls and roof of a building and the top of a van. However, as the shrubs extend along the side of the path all the way to the bridge, visitors need to make a right turn at the top of the steps and follow the right arm of the path.
This also meanders somewhat, but leads to where a skating rink sits beyond a picket fence to the right (touch the sign alongside the rink for skates), and to the left is a fire pit warming outdoor seating. The building – a converted barn – and the van sit on the south side of the parcel; the former is home to a little bakery, the latter the Le’eaf & Bean coffee wagon; both lie alongside a winding boardwalk and have further outdoor seating snuggled between them.
Winter Wonders of Comelia Street and the Toe Beans Cat Café and Rescue, Heterocera – November 2022
The wooden bridge within the parcel spans a narrow stream, the path beyond passing through a set of high gates and into the next parcel and the second of the café destinations I want to talk about – the Winter Wonders of Comelia Street and the Toe Beans Cat Café and Rescue.
Both are the work of Emm Vintner as a part of her Nature Collective brand, with the former offering an almost winter-streets-of-New-York-meets-Dickens’-Victorian-England vibe. The cobbled street is lined to one side by tall apartment buildings and a cosy bookshop. With more snow falling from above, the north side of the street offers winter seasonal elements that help with the more timeless feel to the parcel – an outdoor hot chocolate stand, a snowman, and tall street lamps that might be a gaslight, together with a little place selling fir trees for the holiday season – complete with a modern machine for netting them to allow easier transport.
Winter Wonders of Comelia Street and the Toe Beans Cat Café and Rescue, Heterocera – November 2022
The far end of the street from the gate to Le’eaf and Tinsel provides access to the café, assuming you’re following my footsteps through he parcels.
As its name suggests, the Toe Beans Cat Café and Rescue is a place for both humans and cats – and particularly the latter! Kitties of all ages await visitors, with some also helping themselves to the café’s offerings! A novel aspect of the café is the ability to help toward local tier by “adopting” a cat from the board just inside the door to the left. L$25 will bring you a copy of one of the offers cats (just right-click and PAY the photo of the cat you desire).
Winter Wonders of Comelia Street and the Toe Beans Cat Café and Rescue, Heterocera – November 2022
The square outside the café is warmed on one side by a propane heater for those who would like to sit outdoors, and one of the tables includes a game of draughts which might be enjoyed while munching on the roasted chestnuts available from the little vendor cart in one corner of the yard. Or visitors can sit on the bench next to the cart, which is also warmed by another of the propane heaters.
The final destination for this piece lies on the south-western side of Heterocera and is a place – again possibly befitting the more southerly latitude – which is snow-free for those looking for somewhere warmer to visit. It also, again if you’re following in my footsteps, continues the kitty theme found at the Toe Beans Cat Café in that there is a certain moggy presence to be found here.
Hi Café, Heterocera – November 2022
The work of Hitsu Ruby, the Hi-Café sits alongside the Atoll Road and sits within a cosy 1536 sq m parcel. The café itself sits adjacent to the cobbles of the Atoll Road, a tall brick-built building watched over by the aforementioned moggies and with an inviting, modern décor.
Caught in the shades of Autumn, the setting offers the café, with a span of a canal behind it cutting through the parcel to separate the café from Hitsu’s modest store, where she sells prefab buildings. Both the store and the café are also Hitsu’s own designs, but they appear to be custom builds rather than units she sells. Those interested in her commercial builds can obtain demos through the store, or take a peek at the neighbouring parcel to the west, and her Store #11 on display.
Hi Café, Heterocera – November 2022
The canal itself is bordered on either side by paved footpaths complete with wildling flower beds, places to sit (allowing for the cats laying claim to portions of them!), the two halves of the parcel spanned by a pair of bridges. The rest of the parcel is peppered with little details – the bus stop (/landing point) alongside the road, the little second-hand bookstall / newspaper stand, a Parisienne-style kiosk, a fountain – all of which add character to the setting.
Those wishing to rez props for photography can do so by joining the local Group, and there is a 30-minutes return time for objects that are rezzed; however, if you avail yourself to the opportunity, do be sure to pick up your items hen done, so that other can rez without having to wait.
Hi Café, Heterocera – November 2022
All three locations are equally attractive, offering their own points of attraction. They are not the only such places to be found in Heterocera or SL as a whole, but I offer them here as a small selection, and may well do more pieces like this one in the future.
My audio recording and chat log of the Content Creation User Group (CCUG) meeting held on Thursday, November 17th, 2022 at 13:00 SLT.
My audio recording and chat log from the Third-Party Viewer Developer (TPVD) meeting held on Friday, November 18th, 2022 at 13:00 SLT. Pantera attended the meeting, but was unfortunately held-up beforehand, so around the first 10 minutes is absent from her video (embedded at the end of this summary).
Both meetings are chaired by Vir Linden, and their dates and times can be obtained from the SL Public Calendar.
This is a summary of the key topics discussed in the meeting and is not intended to be a full transcript.
The following reflect the list of current official viewers available through Linden Lab.
Release viewer: version 6.6.7.576223 – MFA and TOS hotfix viewer – November 1.
Release channel cohorts:
Maintenance P (Preferences, Position and Paste) RC viewer version 6.6.8.576431 on Monday, November 14.
VS 2022 RC viewer, version 6.6.8.576310, issued November 4 – utilises Visual Studio 2022 in the Windows build tool chain.
Project viewers:
PBR Materials project viewer, version 7.0.0.576331, issued on November 3.
This viewer will only function on the following Aditi (beta grid) regions: Materials1; Materials Adult and Rumpus Room 1 through 4.
Puppetry project viewer, version 6.6.3.575529, issued on October 12.
Performance Floater / Auto-FPS project viewer, version 6.6.5.575378, October 4.
Love Me Render (LMR) 6 graphics improvements project viewer 6.6.2.573263, July 21.
General Viewer Notes
There is unlikely to be any major changes to the list above in week #47, as this is a short working week for the Lab due to the Thanksgiving holiday (Thursday / Friday).
Github Changeover and Streamlining the Code Contributions Process
Github Work
As previously announced, there is an initiative to improve continuous update integration in the viewer and improve the viewer deployment process.
For TPVs and developers, the most visible aspect of this is moving the viewer repositories from BitBucket to Github. This includes the viewer code base and the other public code bases currently in BitBucket (Autobuild, LLCA, etc.).
There is still no firm date as to when the actual switch-over to using the new repositories will occur, but the viewer development team is working steadily towards it, and the plan remains to provide plenty of advanced warning to TPVs on when LL plan to cut over to the new repositories before making a clean cut-over.
Status
The switch-over to using Github is now slated for “early in the morning” (PST / SLT) on Monday, November 21st, 2022.
This means that from the point of switch-over, the Bitbucket repositories will be locked and carry a warning that they are no longer current, and developers / viewer builders should use the GitHub repositories, as directed to in the warning.
The master viewer branch is already up-to-date on GitHub as of Friday, November 18th, 2022.
Notes on the switch-over were posted to developers on the open-source developers list.
There is no plan in place to phase out the Bitbucket repositories immediately, but they may well be removed in time.
PBR: Materials and Reflections
Project Summary
To provide support for PBR materials using the core glTF 2.0 specification Section 3.9 and using mikkTSpace tangents, including the ability to have PBR Materials assets which can be applied to surfaces and also traded / sold.
To provide support for reflection probes and cubemap reflections.
The overall goal is to provide as much support for the glTF 2.0 specification as possible.
The viewer is available as a project viewer via the Alternate Viewers page, but will only work on the following regions on Aditi (the Beta grid): Materials1; Materials Adult and Rumpus Room 1 through 4.
The focus is currently on reviewing bugs reported by those testing the viewer, and creators using glTF PBR workflows to create content are encouraged to test out their content on the project viewer to ensure things look as expected when imported into SL.
One aspect of SL that does require testing is EEP assets; changes have had to be made to the shaders which mean that commercial EEP settings may not render as expected (things like haze density my be modified, etc).
EEP creators may therefore want to test their settings using the project viewer, and Jira issues – please include “non PBR viewer” shots of how the settings should look and shots taken with the PBR project viewer for easier comparison / understanding of the issues seen.
Issues with alpha blending are being investigated – particularly linear space alpha blending and how best to carry forward “pre-PBR” alpha blending, which does not use linear space.
It has been reported that the PBR project viewer generating some 10% more CPU temperature and 17% more GPU temperature – this may be the result of the viewer having to work that much harder with PBR in order to maintain frame rates.
Reflection probes: concern was again raised over people excessively using probes (e.g. attaching them to all their products / objects they own).
Providing a means for users to disable probes attached to objects they purchase has been previously discussed within the project / CCUG meetings.
It is hoped the latter (people just randomly setting-up probes all over their house / land) can be mitigated against through a mix of education and explicit warnings / actions in the viewer.
Concern was also raised about the potential of localised reflection probes (essentially an invisible prim) could interfere with intended interactions (e.g. a probe enclosing a chair could block people’s ability to sit on the chair). If cases like this are found in testing, a request has been made for bug reports.
The PBR viewer does include a Build / Edit option to “ignore invisible prims” so that when building / editing, an attempt to select an object within the volume of a reflection probe prim will ensure the object is selected, not the probe prim, but it is acknowledged that this kind of operation needs to be better integrated with other mouse click options.
It was noted that this project also marks the start of the deprecation (and eventual removal) of some real-time console performance reports, such as Fast Timers.
It has been reported that some testing the PBR viewer are finding that within the texture console, Bias is constantly being reported at 5 (which tends to cause texture thrashing in non-PBR viewers). However, within the PBR viewer a Bias of 5 should indicate that the viewer is swapping – and keeping to – a lower texture resolution, and so should not result in any texture thrashing.
Screen Space Reflections (SSR)
LL does have a “subtle” SSR system working to replace Linden water reflections as currently rendered.
There is some further work to be carried out before it is “viewer-ready”, with the focus being on ironing out the bumps and cleaning-up bugs.
It was made clear that while this implementation of SSR will be applicable to scenes as a whole, it is not intended to be a replacement for creating mirrors – and so expectations should be set accordingly.
CCUG Meeting Specific Notes
The majority of the meeting was given over to a general discussion, per the cliff-notes below:
VR hardware and Second Life:
While frame rates are not so much an issue now in broad terms, there is still the need to get a high frame rate on a consistent basis for VR viewing to be enjoyable – and this is still not a giving with SL.
However, VR isn’t just about headsets; its about the “full” experience in using a range of associated peripherals: controllers, haptic gloves, the ability to have a “full-body experience” that VR users would want and expect, such as seeing your hand and arm when going to pick something up, being able to grip an object in your hands and feel responses from it when using it (e.g. the strike of a blade against another or a baseball sat against the ball, etc.).
The level of support for this more complete sense of immersiveness requires some extensive re-engineering of Second Life (e.g. facilitating a full and proper Inverse Kinematics system as a single example).
The Puppetry project may facilitate some work towards this. However, the focus of this project is not on providing any form of in-depth VR support (it is intended to work with a broader range of peripherals, notably webcams, although use of some VR software support via OpenVR is being considered), being intended for use by as broad a cross-section of SL users as might be interested in it.
Another problem is determining what people want from VR; is it purely a mechanism for games, or does it need to be capable of “realistic” social interactions (some do still proclaim games, other demand social capabilities; the truth is probably more a blending of the two, just like life in the physical realm).
New users and their experience:
Much was made of the need for a completely new avatar system (LL is actually working on a new all-mesh “starter avatar”, but using the existing skeleton) – but overhauling / replacing the current avatar system raises its own compatibility / market issues.
A fair point was raised by LL concerning the use of eviction / ban scripts that specifically ban avatars that are less than X days old and / or avatars that do not have Payment Information On File.
These tend to get used at event spaces etc., to try to prevent griefers / trolls using throwaway accounts from accessing the space, rather than using other available moderation tools (which, admittedly tend to require human intervention with the right permissions, which might not always be available).
The problem here is that often, a “genuine” new user will often sign-up, go through the new user experience, then try to go to a event – only to immediately find they are denied entry or are ejected without warning or explanation, and as a result, they log-out.
The need for improved tools to handle griefing and trolling are likely required – but no discussion on what form these might take.
Audio: a general conversation on the potential of “full” spatial audio, including directional (e.g. so an audio stream at a disco appears to be coming from the speaker system in the venue) and also sound volumes.
Nothing is currently planned for audio in the roadmap, but it was noted that the first test of using volumes (reflection probes) is in Aditi testing, and LL will obviously seeing how well that works.
It was made clear that scripts will “NEVER” be allowed to create new assets (so no ability to generate notecards from a script). One of the reasons cited for this is the cost of storing assets if there is an uncontrolled ability to generate them through scripts (particularly given SL’s asset count is already in the petabytes range in terms of storage).
TPVD Meeting Specific Notes
Atlassian Jira and Bug Reporting
Atlassian has announced it will be restructuring how it licenses the Jira bug reporting product from 2024 onwards. Currently, LL can run a public-facing Jira reporting system that effectively allows every Second Life user to create an account on it to view all the public SL bug reports and feature requests.
Under the 2024 pricing restructure (which will be pretty much per-account), this will be prohibitively expensive for LL, so they are starting into the process of looking for an alternative means to provide some form of user-facing bug reporting mechanism.
one option being considered is to continue to use Jira internally (where the number of licensed accounts can be controlled), and use a different mechanism for public bug reporting, with a bridge between the two.
Another is to move away from Jira entirely.
No decision has been made as yet, but as Firestorm also use Jira, the suggestion has been made that the two develop a joint plan to resolve the situation in terms of future tools.
The topic lead to a general discussion on possible options, but no conclusions drawn – and there is sufficient lead-time on the matter for various options to be looked into, allowing for the time required to transition to any alternate that might be selected / finding the means to keep the wealth of information on the SL Jira available for reference.
General Notes
There is a report that Active Voice on at least some viewers is not updating correctly (e.g. following a teleport, and it is proving easier to enable / disable Voice morphing vie the menu than to disconnect / reconnect Voice in order to correct.
The issue here is not so much which is the preferred method to correct the problem, but whether the Active Voice list failing to update is a widespread issue with viewers, and whether it can be reproduced on the official viewer & a bug report raised.
Beq Janus has written a post on alpha blending issues (see: Alpha blend issues? Get them sorted – subtitled Making it easier to avoid alpha-clashes with Second Life and OpenSim outfits). Rather than have me decimate the discussion, please refer to the video fat 35:56 through video end for more.
As Thanksgiving arrives in the United States, Shandon Loring presents singer-songwriter Arlo Guthrie’s famous 1967 musical monologue, Alice’s Restaurant Massacree (also popularly known as Alice’s Restaurant, and the inspiration of the 1969 Arthur Penn film of that name, starring Guthrie himself).
Inara Pey: Living in a Modemworld 